Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RB19EA-3A2

RB19EA-3A2 (5C75A) Magic Chef Refrigerator - Overview

Get Parts and Repair Help for RB19EA-3A2

If you know the refrigerator repair part you need, you can browse the list of all parts on the RB19EA-3A2, or you can search by name or part description. You can also find your part by where it is located on the RB19EA-3A2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RB19EA-3A2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$13.75

Crisper Shelf Support Kit

This support is used with the crisper drawer shelf.

$18.42

Leveling Leg

Sold individually.

$17.05

Hinge Pin Bushing

This bushing is to be used with a 1/4 inch pin.

$10.01

Butter Dish

$2.80

Screw

Sold Individually.

Single Lamp Socket Kit

NOTE: This is now the single lamp kit socket. The dual lamp kit socket is no longer available.

$15.07

BUSHING- L

Meat Drawer

This is the most shallow drawer in your refrigerator and is generally used to hold your meat/deli foods.

Single Flush-Mount Screw

Sold Individually. This screw holds the handle in place on the freezer door.

Lower Hinge Pin

This lower hinge pin is almost an inch long. It is made of metal.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 67 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

cocktails running out of ice

  • Customer: Craig from Westminster, CA
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
  • 51 of 56 people found this instruction helpful
filled both ice cube trays up with water and placed in the freezer.. within hours my ice oproduction was doubled! no more warm cocktails : ) read more

Thermostat ceased to function. Fridge very cold.

  • Customer: Paul from Millboro, VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 27 of 37 people found this instruction helpful
I removed control knobs and a couple of screws and forced the assembly down enough to remove the old thermostat, and insert the new one. Lucky me it was a identical replacement item. Job took about an hour. read more