Models > RB184RLDA (DG48A)

RB184RLDA (DG48A) Magic Chef Refrigerator - Overview

Get Parts and Repair Help for RB184RLDA

If you know the refrigerator repair part you need, you can browse the list of all parts on the RB184RLDA, or you can search by name or part description. You can also find your part by where it is located on the RB184RLDA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RB184RLDA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RB184RLDA [Viewing 1 of 1]

$3.17

Light Bulb - 7W

Sold individually. This bulb is a 7 watt appliance incandescent light bulb.

$127.20

Icemaker Auger and Crusher Blade Assembly

$3.96

Compression Nut

$3.56

Plastic Tubing

1/4" Plastic tubing, 8 1/2 feet long.

$3.81

Compression Nut - 5/16"

$3.71

Ice Door Seal

$24.48

Ice and Water Actuator Switch

Ice Door Chute Insulation

This is part of the ice door chute and acts as a barrier (insulator) when the chute is not being used. It helps keep the ice cold once the ice cubes are conveyed from the container to the discharge opening.

$19.16

DOOR- ICE

$3.84

Screw

This screw is sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Dispenser had jammed up and become inoperative

  • Customer: James from Robinson TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 21 of 24 people found this instruction helpful
The parts discription was a bit vague and I wasn't sure exactly what I was ordering, but I received everything I needed and it works fine. The combination screw conveyor/ice crusher came in one piece. The ice cube bin is a plastic assembly that snaps apart. I used a wide blade screw driver carefully to facilitate assembly/disassembly. Once you have it ap... read more

the ice/water actuator switch burnt out and was stuck on.

  • Customer: Jon from Nampa ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 7 of 8 people found this instruction helpful
Removed the rubber cover over the actuator switch. Used a screwdriver to remove the switch, disconnected the wires. I then removed the switch from the mounting bracket using a small philips head screw driver. Installed the new switch on the mounting bracket then installed the switch onto the freezer door. The only difficult part was installing the rubbe... read more

Fridge missing agitator assembly and ice bucket.

  • Customer: Ron from Deerfield IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
While ordering the assembly, I had thought that the ice bucket was included but it wasn't. So I ordered the ice bucket afterwards. Maybe a little more clarity as far as what parts come in the whole assembly would save some time. All in all, the agitator was very easy to install, along with the ice bucket. After securing the agitator to the existing assembly ... read more