Models > RB17HN-2AF

RB17HN-2AF (8C63A) Magic Chef Refrigerator - Overview

Get Parts and Repair Help for RB17HN-2AF

If you know the refrigerator repair part you need, you can browse the list of all parts on the RB17HN-2AF, or you can search by name or part description. You can also find your part by where it is located on the RB17HN-2AF by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RB17HN-2AF [Viewing 1 of 1]

$2.70

Screw

This screw is sold individually.

$59.62

Evaporator Fan Motor - Blade NOT Included

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils.

$26.83

BLADE- EVA

FREEZER SHELF CUP

$3.72

PIN- AIR T

SEPARATOR

$3.72

WASHER- SP

SCREW

BRACKET

$8.09

ORIFICE, FAN BLADE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

evaporator fan was noisy

  • Customer: Dwayne from Gastonia NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 2 of 6 people found this instruction helpful
First I unplugged the refrigerator. Next item was the ice-maker; remove (3) screws and unplug it from the back wall. Third task is remove the (4) screws that attach the back wall of the freezer compartment. Lift the wall up enough to dislodge the center cooling shaft that the fan rides in and remove the rear wall. The last item is the fan motor which is att... read more

motor wore out making loud noise

  • Customer: James from Bel Air MD
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 3 of 10 people found this instruction helpful
unplug the refrigator, remove everything from
frezer compartment. remove ice maker three screws and un plug. remove rear panel 4 screws
remove motor bracket from rear panel 4 screws
unplug motor . replace motor and reasemble in
reverse order. the new motor is very quiet. read more

Temp in the refrig side was too high. Freezer OK

  • Customer: James from Sacramento CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I unpluged the refrig, removed the shelves and the back panel on the freezer side of the unit. This exposed the fan motor and fan blade. I removed two screws holding the fan unit in place, unpluged the wires connecting the fan unit to power, and then removed two other screws securing the fan motor to the bracket. I removed the fan motor blade from the ol... read more