Models > RB170PA

RB170PA (DG28A) Magic Chef Refrigerator - Overview

Get Parts and Repair Help for RB170PA

If you know the refrigerator repair part you need, you can browse the list of all parts on the RB170PA, or you can search by name or part description. You can also find your part by where it is located on the RB170PA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RB170PA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 9 hrs and your part ships today!
$45.40

Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

Order within the next 9 hrs and your part ships today!
$2.70

Screw

This screw is sold individually.

Order within the next 9 hrs and your part ships today!
$37.79

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air cooling for the condenser coil.

Order within the next 9 hrs and your part ships today!
$8.59

Light Rocker Switch

This light switch is triggered by the door opening and closing.

Order within the next 9 hrs and your part ships today!
$2.07

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

Order within the next 9 hrs and your part ships today!
$2.70

SCREW

Sold individually.

Order within the next 9 hrs and your part ships today!
$2.70

Screw

This is screw is sold individually.

Order within the next 9 hrs and your part ships today!
$76.13

Cold Control Thermostat

This cold control thermostat has a temperature range from 37 degrees Fahrenheit to 27 degrees Fahrenheit and a capillary length of 29 iches. This cold control thermostat cycles on ...

Order within the next 9 hrs and your part ships today!
$7.58

TRAY

This fourteen cube ice cube tray is eleven inches long. It is all white in color and is made entirely of plastic.

Order within the next 9 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 123 of 135 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Sometimes the condenser fan would start causing the refrigerator to overheat.

  • Customer: Tom from Franklin WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 97 of 104 people found this instruction helpful
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire a... read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 44 of 54 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more