Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RB1000XKW0

RB1000XKW0 Whirlpool Wall Oven - Overview

Get Parts and Repair Help for RB1000XKW0

If you know the wall oven repair part you need, you can browse the list of all parts on the RB1000XKW0, or you can search by name or part description. You can also find your part by where it is located on the RB1000XKW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for RB1000XKW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RB1000XKW0

[Viewing 4 of 4]

Manuals & Care Guides for RB1000XKW0

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$43.04

Bake Element - 240V 2100W

This bake element is a partially open tapered style with push on wire terminals.

$12.17

Oven Control Knob

Sold Individually. This part has been updated and no longer has the red dot. It is ONLY available in black now. This knob accepts a double flat shaft.

$3.02

Cover Screw

Sold individually.

$24.04

2 Piece Broiler Pan

This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high tem...

$50.48

Broil Element - 240V

This light bulb can be used in a microwave and oven to illuminate the interior. The measurements are 5.3 x 3.8 x 1.2 inches and weigh 0.3 ounces. It is a 5 watt, 12 volt halogen light bulb. If your bulb flickers, inconsistently turns on and off, or is broken, replacing it is the solution. We reccomend you wear work gloves while handling and replacing this bulb. Remember to unplug the microwave or oven from power source before installing and refer to the diagram provided by the manufacturer for further instruction and accurate guidance.

$6.24

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...

$3.02

Screw

This screw is sold individually.

$11.46

Spray Paint - 12 oz. - White

Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is...

$25.32

Insulation

This insulation is also known as oven wrap insulation, and is used in conjunction with your range. Its purpose is to be installed in between the oven and the cabinets that surround it. This will help prevent the heat from escaping while cooking and essentially keep it locked inside the oven. The most common reason for needing to replace the insulation in your oven is that it becomes a comfy place for vermin to nest. Before making this installation, it would be best to disconnect the electrical power to your appliance, and to make sure that your range is cool to the touch.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Baking element in oven exploded

  • Customer: Chad from Bloomington, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 41 of 44 people found this instruction helpful
Removed the broken element by taking out the two screws in the back wall of the oven and unplugging the wires. Then did reverse to install the new element. Very simple repair job. read more

Bottom heating element had burned out.

  • Customer: Randy from Flagstaff, AZ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 19 of 19 people found this instruction helpful
turned off the breaker (240 volts and it was outside, so it took longer than 15 minutes). Removed two screws in the back of the oven, one on each side of the old element, and pulled the old element forward. The wires on the back add some resistance, but they are long enough to pull forward a short distance (3 inches) without damage. Unplugged the old elemen... read more

Scratches in Surface

  • Customer: Michelle from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 22 of 31 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more