Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RAB1121EW0

RAB1121EW0 Roper Washer - Overview

Get Parts and Repair Help for RAB1121EW0

If you know the washer repair part you need, you can browse the list of all parts on the RAB1121EW0, or you can search by name or part description. You can also find your part by where it is located on the RAB1121EW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for RAB1121EW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$11.98

Direct Drive Motor Coupling

This coupling kit is used between the motor and the transmission on direct drive washers with no belt. This is the newer version and is made with new metal sleeves for added stren...

Order within the next 28 mins and your part ships today!
$25.37

Clutch Assembly

A worn clutch can cause a slower spin speed which will leave your clothes wet after a cycle. This clutch assembly comes with brake cam driver, blue spring for large capacity washers and black spring for compact washers. As per factory, the green spring (1.24") replaces the black spring (1.46").

Order within the next 28 mins and your part ships today!
$15.16

Water Inlet Valve with Mounting Bracket

This part could have either a blue colored valve body or a green colored valve body. There are two ports for water to enter and this valve is compatible with a half inch ID hose. I...

Order within the next 28 mins and your part ships today!
$11.30

Tub Wear Pads - Package of 3

This package of pads contains three brown tub wear pads.

Order within the next 28 mins and your part ships today!
$7.40

Leveling Spring

This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.

Order within the next 28 mins and your part ships today!
$28.57

Lid Switch Assembly

This part makes sure that the lid is shut before allowing the machine to start or agitate.

Order within the next 28 mins and your part ships today!
$14.02

Suspension Pads - Package of 3

Order within the next 28 mins and your part ships today!
$15.50

Tub-to-Pump Hose Kit

This kit comes with the clamps.

Order within the next 28 mins and your part ships today!
$29.30

Clutch Lining Kit

This kit comes with springs, hardware, and brake lining.

Order within the next 28 mins and your part ships today!
$7.22

Touch-Up Paint - White

18ml

Order within the next 28 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No movement from Basket & agitator

  • Customer: Jeff from Wayne, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 747 of 796 people found this instruction helpful
The job looked intimidating but turned out to be very easy.
First take off the water pump by removing the two clips that hold it in place. Place a shallow pan under the pump to catch the water that is in the pump and hoses. Open the hose clamps with a pair of pliers or channel locks (better) and slide the hoses off of the water pump.
The motor co... read more

Washer stopped at rinse cycle

  • Customer: Don from Wyoming, MN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 597 of 615 people found this instruction helpful
Removed the top and back panels. Replaced
compoments and reassembled.
Test run machine. Ran like new! read more

Water pump leaking when machine used.

  • Customer: Tom from Granby, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 486 of 511 people found this instruction helpful
The hardest part of this job was pulling the machine away from the wall so the hoses could be disconnected and the machine flipped onto it's back. Putting the machine on it's back does two things. It drains the water left in the bottom of the tub so it won't pour out onto the motor when the old pump is removed, and gives the necessary access to the pump. ... read more