Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RA524W2

RA524W2 Hotpoint Range - Overview

Get Parts and Repair Help for RA524W2

If you know the range repair part you need, you can browse the list of all parts on the RA524W2, or you can search by name or part description. You can also find your part by where it is located on the RA524W2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RA524W2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RA524W2

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Surface Burner Terminal Block Kit

This kit includes the female contact with wires, terminal block and mounting clip.


Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.


Drip Bowl - 8"

Sold individually. This part is located beneath the element and catches any spills.


Rolled Terminal Surface Unit - 6" - 1250W


Surface Burner - 8" - 2100W








Thermostat Knob - Black/Silver

This knob accepts a double-flat shaft.


Surface Unit Switch - 6" - 1400W

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burner was shorting out

  • Customer: douglas from louisville, KY
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 38 of 38 people found this instruction helpful
unplugged unit pulled it away from wall took off the backplates traced wire to plug replaced with part ordered very smooth operation. the most impressive thing to me was i ordered part on computer and it was at my door in 30 hours awesome. read more

The electric burner on the stove top would no longer heat up, when we removed it we noticed that the element was completely burned. I mean fryed!

  • Customer: Monica from Point Blank, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 10 of 11 people found this instruction helpful
First, I got my husband and let him know that the part was in (really easy), then I sat back and watched as he pulled the oven from the wall, unplugged it and lifted the stove top (so far, I haven't broken a sweat)! I then peeped up under the top as he removed a scew from the element and then several screws from the back panel, trace the wire to the needed ... read more

Front Large Most Powerful Burner's Block had broken so it didn't heat

  • Customer: Martin from plainfield, CT
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers
  • 3 of 3 people found this instruction helpful
This electric stove has a lift up top which I lifted to get at the block and follow the wire back to the terminal at the back of the the stove. I removed the 5 small lag screws holding the back in place, removed the backing followed the wires back to where they connected in the Stove On/Off Control, disconnected the two wires from the control and then laid ... read more