Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RA520W2

RA520W2 Hotpoint Range - Overview

Get Parts and Repair Help for RA520W2

If you know the range repair part you need, you can browse the list of all parts on the RA520W2, or you can search by name or part description. You can also find your part by where it is located on the RA520W2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RA520W2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RA520W2

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$13.10

Surface Burner Terminal Block Kit

This kit includes the female contact with wires, terminal block and mounting clip.

$7.71

Drip Bowl - 6"

The drip bowl on your range is designed to catch any spills that may occur when cooking. This drip bowl is black in color and is 6 inches in diameter. The chrome drip bowl is intended for use with rolled, terminal-style plug-in surface element units. The drip bowl is located beneath the surface element, so you will need to remove the element prior to swapping out the old drip bowl for a new one. Many of our customers have rated this repair as easy, and you will not require any tools to complete it. This part is sold individually.

$9.64

Drip Bowl - 8"

Drip bowls are located under the heating elements and catch grease and spills that come from cooking on your stove top. If your drip bowl is damaged or rusted, it could allow greas...

$39.09

Rolled Terminal Surface Unit - 6" - 1250W

$36.62

Surface Burner - 8" - 2100W

$34.51

SEAL-HEAT

$34.51

SEAL-HEAT

$31.23

Surface Element Knob - Black/Silver

Sold individually. This knob accepts a D-shaped shaft.

$69.22

OVEN RACK

$33.78

Thermostat Knob - Black/Silver

This knob accepts a double-flat shaft.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burner was shorting out

  • Customer: douglas from louisville, KY
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 38 of 38 people found this instruction helpful
unplugged unit pulled it away from wall took off the backplates traced wire to plug replaced with part ordered very smooth operation. the most impressive thing to me was i ordered part on computer and it was at my door in 30 hours awesome. read more

The electric burner on the stove top would no longer heat up, when we removed it we noticed that the element was completely burned. I mean fryed!

  • Customer: Monica from Point Blank, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 10 of 11 people found this instruction helpful
First, I got my husband and let him know that the part was in (really easy), then I sat back and watched as he pulled the oven from the wall, unplugged it and lifted the stove top (so far, I haven't broken a sweat)! I then peeped up under the top as he removed a scew from the element and then several screws from the back panel, trace the wire to the needed ... read more

Burners would not lay flat

  • Customer: Alfred from Forest, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 11 people found this instruction helpful
Removed the burner elements, removed and disposed of old drip pans, cleaned the area, relaced with new drip pans and replaced the burner elements. Verified all burners were level - good as the day it was new! read more