Models > RA513*02

RA513*02 Hotpoint Range - Overview

Get Parts and Repair Help for RA513*02

If you know the range repair part you need, you can browse the list of all parts on the RA513*02, or you can search by name or part description. You can also find your part by where it is located on the RA513*02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RA513*02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RA513*02 [Viewing 1 of 1]

$3.80

Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.

$2.92

Trim Ring - 6"

This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

$3.71

Trim Ring - 8"

This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

$6.00

Drip Bowl - 8"

This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.

$22.41

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$34.01

Tilt Lock Hinge Mounted Surface Unit - 8"

This surface element kit includes an 8 inch element, two wire, 2350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

$1.34

Screws - Package of 12

$29.16

Tilt Lock Hinge Mounted Surface Burner Kit - 6"

This tilt lock hinge mounted surface element kit includes a 6 inch, three wire, 1350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

$4.41

Light Cover

$16.87

Broiler Pan - Large

Includes the pan and grate.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Needed to replace Drip Pans and Trim Rings for old stove

  • Customer: Cynthia from Tampa FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 17 of 19 people found this instruction helpful
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!

Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct parts. read more

The gasket needed to be replaced in top oven, it was brittle and broken.

  • Customer: JoAnn from Auburn WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 11 people found this instruction helpful
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove entire oven from cabinet... read more

Large burner would operate on high setting only.

  • Customer: Ernest from Bellevue NE
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 10 of 12 people found this instruction helpful
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel. read more