Models > RA511*J4

RA511*J4 Hotpoint Range - Overview

Get Parts and Repair Help for RA511*J4

If you know the range repair part you need, you can browse the list of all parts on the RA511*J4, or you can search by name or part description. You can also find your part by where it is located on the RA511*J4 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RA511*J4 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RA511*J4 [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.92

Trim Ring - 6"

This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

$3.80

Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.

$3.51

Trim Ring - 8"

This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

$6.00

Drip Bowl - 8"

This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.

$22.41

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$42.08

Tilt Lock Hinge Mounted Surface Unit - 8"

This surface element kit includes an 8 inch element, two wire, 2350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

$25.54

Tilt Lock Hinge Mounted Surface Element - 6"

This tilt lock hinge mounted surface element kit includes a 6 inch, two wire, 1350 watt surface element, and a terminal block with all three-wire units. These high rise elements do...

$32.13

Broil Element Kit

This element has screw on terminals.

$1.27

Screws - Package of 12

$1.70

Center Piece - 6" Burner

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Needed to replace Drip Pans and Trim Rings for old stove

  • Customer: Cynthia from Tampa FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 16 of 18 people found this instruction helpful
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!

Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct parts. read more

Two 6" and two 8" burner elements needed replacing on a 36 year old counter range.

  • Customer: Charles from McAllen TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 17 of 21 people found this instruction helpful
First of all I want to thank PartSelect. I have been looking for these parts for over 15 years. I am so happy to have found PartSelect. 1. Turn off Range 2. Turn off Breaker to the Range at your home Breaker Box. 3. Turn on Range to see if you turned off the right Breaker if so then turn Range off. 4. Lift Burner Element up. 5. Take off Silver Trim Ring and ... read more

Large burner would operate on high setting only.

  • Customer: Ernest from Bellevue NE
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 10 of 12 people found this instruction helpful
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel. read more