PSS25SGNABS General Electric Refrigerator - Instructions

Followed instructions and it was very easy

followed video

I bought the complete kit. pulled the old one out and pushed the new one in. No problem at all.

Solenoid pushing the crushed ice flapper was burned out. Solenoid was easy to find unplug and replace. I used the old piston which simplified things. Now works great

the parts I ordered did not fix the problem the problem was with repairman did not follow the instruction and cut jumper wire on main control board

A very simple install. Requires the removal of 4 screws and plugging in new heating element refer to the excellent diagrams provided on line

The repair was extremely easy because PartSelect.com had a video on how to repair this item. I set up my ipad and played the video step by step. The gentleman, who was explaining how to replace the part, was outstanding! He did not miss one step which made my repair very easy. It took less than 30 minutes from getting my tools, replacing the part, re-installing the ice bin, and clean up. The only prep work was, in the morning, I removed the ice bin so it could be room temperature, just like the video said. (I saved the ice so my family could have ice throughout the day.)

Unplugged power cord, removed back panel, disconnected wires, removed existing control board, installed new control board, reconnected wires, replaced back panel, plugged in power cord. The video instructions made it really easy. Saved at least $100.00 doing it myself. Awesome!

I followed the instructions under "Plastic auger blades broke in ice tray". The only difficulty was getting the part 325 to release from part 352. Had to do some careful prying with small flat screwdrivers to make the release.

Followed the online video exactly and it was easily done. Couldn't have been better. The problem is solved.

I followed Parts select video and the only tough part was the plastic tabs were difficult to release. A good tip so that you don't mix up the cutter blades is to slip them on a screw driver as you take them off old auger. I'm a 84 year old widow and I'm proud of myself!

I repaired IAW the PartSelect video. Very easy. One thing that should be mentioned in the troubleshooting process, is to check the retention spring on the flapper. That spring could come off and also cause the flapper not to close.

We watched the video on how to install the part. When the part arrived we were all set. The video was so informative that we knew exactly where to go to install and what tools to use. This was great and we have recommended this company to anyone who needs to do repair on their appliances without having to pay for a service call, parts and labor. It cost us approximately $42.00 which other wise would have been easily $200.00 for the GE repair person or another appliance repair person

Turned power off at breaker. Took off front panel on the door. Unscrewed the panel where the electrical parts were plugged in. Then you could unscrew the old solenoid assembly and install the new one. Cleaned around the Ice shute since some mold was there. Put all back together. We watched the video from you tube about 5 times!!

Followed the Parts Select video step-by-step. It was exactly as the video described and took about 5 minutes (though I already had the cover off). Almost a week later and the refrigerator is running fine.