Models > PRG3010NP > Instructions

PRG3010NP Jenn-Air Cooktop - Instructions

All Instructions for the PRG3010NP
1 - 8 of 8
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
hard to get old one out
easy to put in
Parts Used:
Oven Light
  • robert from chatham, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
31 of 70 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The marks are 90 degrees off from our stove markings
I didn't. I'll need to return these knobs as they won't work for this oven. While they fit and look nice, the marks are 90 degrees off from the stove markings.
Parts Used:
Burner Knob
  • David from Rocky Mount, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
needed new oven light assembly/part #PS1864256
Removed old assembly, attached wires to new and inserted into space for same. Of course you must turn off the range circuit breaker. The part that took the most time was removing the old assembly. Once that was done, the rest took only a few minutes.
Parts Used:
Oven Light
  • Sara from Harwich Port, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
25 of 70 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
An old knob had lost its grip, so I purchased this OEM replacement
I simply pushed the knob onto the protruding staff. Perfect fit.
Parts Used:
Burner Knob
  • Robert from NATICK, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken knob
EASY!!!
Thank you!!
Parts Used:
Burner Knob
  • Susan from CHESTER, CT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Burner Knob
Part arrived via fedex really fast. Part slipped right on: we are very pleased.
Parts Used:
Burner Knob
  • Barbara from Flagstaff, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Burner Knob
Replaced Burner Knob
Parts Used:
Burner Knob
  • gerard from staten island, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
oven light replacement
bought used, oven light was damaged from previous repair attempt, without installation instructions removing the fixture was tricky, had to bend the housing tabs inward w/screwdriver to release fixture (more damage). once out the new fixture went in place quite easily, wires simply hook up, re install back panel, re-connect power, Have a nice Day!
Parts Used:
Oven Light
  • martin from portland, OR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the PRG3010NP
1 - 8 of 8