Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PRG3000P

PRG3000P Jenn-Air Range - Overview

Get Parts and Repair Help for PRG3000P

If you know the range repair part you need, you can browse the list of all parts on the PRG3000P, or you can search by name or part description. You can also find your part by where it is located on the PRG3000P by selecting a section below. We’ve also included any installation videos we have for PRG3000P parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.18

Screw, 10-16 x 1

This screw is sold individually.

Order within the next 5 hrs and your part ships today!
$24.04

2 Piece Broiler Pan

This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high temperatures. This set includes both the pan and the grid. The grid is the top part. The slotted design allows grease to easily drip into to the pan below. Not only does it catch all of the drippings, it also prevents splatter and smoke while cooking. The pan can also be used separately for baking and roasting. This cookware features a durable porcelain finish, which means it is incredibly easy to clean, and is dishwasher safe. It is roughly 1.5 inches deep, and measures approximately 16.5 inches by 12.5 inches. If your two-piece broil plan is lost, rusted, or damaged this is the replacement you need.

Order within the next 5 hrs and your part ships today!
$3.00

Frame Screw

Sold Individually.

Order within the next 5 hrs and your part ships today!
$43.83

LIGHT- OVE

This oven light assembly is a little over four inches long and comes with the lens and 660-watt light bulb. Make sure your appliance is unplugged or circuit breaker is off before installing this new part. It is located inside the oven and may need to be replaced if the socket has failed, causing the light to not come on inside the oven. It may also need to be replaced if you notice that the glass is broken and the whole assembly needs to be replaced. The part is located in the upper right hand side of the oven. To reach the bulb you will need to open the oven door and remove the upper rack.

Order within the next 5 hrs and your part ships today!
$151.43

Door Hinge

Order within the next 5 hrs and your part ships today!
$33.48

Nameplate - Stainless Steel

Order within the next 5 hrs and your part ships today!
$3.04

Hinge Screw

Sold Individually.

Order within the next 5 hrs and your part ships today!
$4.87

SCREW

Part might differ in appearance, but functions same as original. Sold individually.

Order within the next 5 hrs and your part ships today!

KIT- BURNE

$251.28

Glow Bar Oven Igniter - Rear

This part is used to light the oven.

Order within the next 5 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

hard to get old one out

  • Customer: robert from chatham, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 28 of 65 people found this instruction helpful
easy to put in read more

needed new oven light assembly/part #PS1864256

  • Customer: Sara from Harwich Port, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 24 of 67 people found this instruction helpful
Removed old assembly, attached wires to new and inserted into space for same. Of course you must turn off the range circuit breaker. The part that took the most time was removing the old assembly. Once that was done, the rest took only a few minutes. read more

oven light replacement

  • Customer: martin from portland, OR
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
bought used, oven light was damaged from previous repair attempt, without installation instructions removing the fixture was tricky, had to bend the housing tabs inward w/screwdriver to release fixture (more damage). once out the new fixture went in place quite easily, wires simply hook up, re install back panel, re-connect power, Have a nice Day! read more