Models
>
PP9830DJ1BB
PP9830DJ1BB General Electric Cooktop - Overview
Sections of the PP9830DJ1BB
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Dual Radiant Element - 9 Inch
PartSelect #: PS2321567
Manufacturer #: WB30T10133
The dual radiant element for your range or cooktop provides the heat that you cook with. It is found under the main cooktop. If your element will not heat, you will need to replace it with this part. ...
$124.69
In Stock
Switch Knob
PartSelect #: PS226860
Manufacturer #: WB03X10136
Sold individually. This knob takes a double-flat shaft.
$47.61
In Stock
Foam Rubber Tape
PartSelect #: PS11726663
Manufacturer #: WB02X26088
This is foam tape and it is usually used in conjunction with your range, specifically on the cooktop. Its purpose is to help seal the edges of the cook top to the counter top. Another of its functions...
$39.82
In Stock
SWITCH FAN
PartSelect #: PS2353559
Manufacturer #: WB24X10174
This part is the replacement fan switch or downdraft vent fan knob for your range hood. It measures approximately 2 inches by 1 inch. The fan switch allows you to turn on the range hood fan when it is...
$56.66
In Stock
Questions And Answers for PP9830DJ1BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
CARLOS
January 25, 2020
Hi, my stovetop hot light continues to stay on even if the stove has been off for hours and the top is not hot. What part can I purchase to fix this issue?
For model number PP9830DJ1BB
Hello and thank you for writing.
There's a bi-metal thermostat in the part of the element where the wires connect. It's part of the glass tube in the center of the element. When it reaches its set temperature it closes and completes the circuit to the light and it turns on. When you turn the element off the thermostat remains closed until it cools to the set temperature and opens breaking the circuit to the light and it turns off. Yours indicator light PS237434 might be faulty and/or possibly a malfunctioning harness PS3496797, you should check the part(s) for signs of damage, and replace it as necessary. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the PP9830DJ1BB
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
9" Radiant Element did not heat up.
I started by Unscrewing the range top. 2 small screws. I took off the old piece by unclipping the piece . Then I color coded each wire so that I would know exactly where I would place the wires for the new part. 30 min maximum time spent changing the part. Please don't forget to unplug the range before you start.
Parts Used:
-
Andrea from ORLANDO, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
41 of 52 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original heating Element was burned out
1st replacement part was damaged from Shipping.
Parts Select sent a new one that i received in only a few days.
our stove is slid into a granite island so the disassembly was not as simple as most. It was necessary to remove the controls, the controls housing & screws along the top of the oven door.
Within an hour the sto ... Read more ve was back in place and working perfectly.
Great service from Parts Select
Parts Select sent a new one that i received in only a few days.
our stove is slid into a granite island so the disassembly was not as simple as most. It was necessary to remove the controls, the controls housing & screws along the top of the oven door.
Within an hour the sto ... Read more ve was back in place and working perfectly.
Great service from Parts Select
Read less
Parts Used:
-
Janice from ST CLR SHORES, MI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element bad
Since this was the third time I did it all I had to take two screws out to lift the top of stove and replace element.
Parts Used:
-
Cheryl from JOHNSONVILLE, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!