Models > PLGC30S8CCB

PLGC30S8CCB Frigidaire Cooktop - Overview

Get Parts and Repair Help for PLGC30S8CCB

If you know the cooktop repair part you need, you can browse the list of all parts on the PLGC30S8CCB, or you can search by name or part description. You can also find your part by where it is located on the PLGC30S8CCB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the PLGC30S8CCB [Viewing 4 of 4]

$37.39

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$19.11

Medium Burner Cap - Black - 9.5k

$76.70

Burner Pan - Large

$67.37

Burner Pan - Medium

$18.64

Bushing

$62.41

Burner Cap - Small

Sold individually.

$137.62

Gas Pressure Regulator

***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.

$134.52

VALVE

$77.45

LP Gas Conversion Kit

$66.77

Top Burner Knob

Sold individually. This knob accepts a D-shaped shaft.

Common Symptoms of the PLGC30S8CCB [Viewing 1 of 28]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burner ingnighter would not lite burner

  • Customer: Wayne from Palestine IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench(Adjustable)
  • 16 of 49 people found this instruction helpful
Replaced the ingintion module, still did not work, replaced the burner complete with new ingiter , it now works but another one quit . the front right one has 5 ohms resistance ,replaced with new one with 0 ohms, the back left has 2 ohms resistance and now it does not work , will need to replace that burner allso. too bad you can't buy just the spark module ... read more

Two of theTop gas burners would not spark

  • Customer: Robert R from Lewistown PA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took 6 screws out holding the top on from the sides. Lifted the top front, popped out the spark module, Took 6wires off & reversed the processed to install the new one. I was really amazed when I ordered it Wednesday and it arrived on Friday. Believe me I bookmarked this site. read more