Below is a list of all parts for the Frigidaire Dishwasher PLD2560LCC1. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
The gasket provides a waterproof seal between the tub and the door.
This gasket goes on the bottom of the dishwasher door.
Note: Once the gasket is replaced and you continue to have water around the bottom corners of the door panel, you may need to order the splash shield kit.
This dishrack includes the wheels.
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
This spray arm is located on the lower half of your dishwasher. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spr...
This nut is sold individually. It is used to install the heating element.
The drain hose connects to the pump located below the lower spray arm. It aids in proper dishwasher drainage. Size: 7.5 feet long
The pump ejects the water from the dishwasher.
This part is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher and is located on the bottom of the dishwasher.
This door strike is mounted to the top of the dishwasher cabinet. This part catches the door handle to keep it closed.
This linkage attaches to the door spring.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.