Models > PK956SM1SS

PK956SM1SS General Electric Oven - Overview

Get Parts and Repair Help for PK956SM1SS

If you know the oven repair part you need, you can browse the list of all parts on the PK956SM1SS, or you can search by name or part description. You can also find your part by where it is located on the PK956SM1SS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$12.82

Oven Sensor

This sensor detects the temperature within the oven cavity.

$8.32

Halogen Light Bulb - 50W

This light bulb is used in the interior oven.

$1.70

Screw

This screw is sold individually.

$2.36

Single Screw Only

Sold Individually.

$4.21

SCREW

$12.38

SCREW-PKG 12

$31.39

Meat Probe Thermistor

$2.79

Screw

Sold Individually.

$5.99

LENS OVEN LAMP

$4.21

NUT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven would go in to a F2 Error

  • Customer: Peter from stamford CT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 32 of 43 people found this instruction helpful
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function. read more

Oven wouldn't preheat above 300 degrees

  • Customer: Gerald from Cape Canaveral FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 14 of 16 people found this instruction helpful
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great. read more

Oven Overheating upto 200 degrees!!

  • Customer: Lee from Greenfield IN
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 6 of 7 people found this instruction helpful
Replaced temperature sensor in the oven first ($10 part, always start with least expensive possibility!), but that didn't solve the problem. 5-10 minute repair, not counting moving the range in and out of it's home between cabinets. Next replaced the control board ($90 part) which solved the overheating problem. 15 to 30 minute repair, don't be intimidate... read more