Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PHS69EHSS3 > Parts

PHS69EHSS3 Frigidaire Refrigerator - Parts

All parts for the Frigidaire Refrigerator PHS69EHSS3

Below is a list of all parts for the Frigidaire Refrigerator PHS69EHSS3 - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the PHS69EHSS3
15-28 of 311
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$18.53

Shelf Insert Glass

$29.15

Meat Pan Rail - Left Side - White

Mounting screws NOT included.

$30.38

Dispenser Crusher Housing

This dispenser crusher housing may also be known as a refrigerator ice crusher housing, and is compatible with your refrigerator. The function of the dispenser crusher housing is t...

$7.71

SOCKET

The light socket on your refrigerator houses the light bulb and connects it to the power source. If you notice that your refrigerator light does not come on when you open the door, you may need to replace the light socket. This light socket is made of white plastic with two metal prongs. The light socket is located inside the refrigerator. Many of our customers have rated this repair as easy. To complete this repair, simply pop the old socket out with a small flat blade screwdriver and disconnect the wires. Then simply reconnect the wires to the new socket, and snap it in place with the locking tab.

$14.33

Ribbon Cable Harness

Used in the dispenser board area.

$10.94

Fan Blade

This part blows air over the condenser.

$7.72

DRUM

This part helps push the ice threw the front plate to be crushed.

$7.30

Screw

This screw is sold individually.

$80.62

Damper Assembly - 115V 60Hz

This part includes the seal.

$29.38

Pan Cover Insert

Glass Only. Frame not included.

$9.49

Upper Hinge Bearing

Can be used on either Fresh Food or Freezer side of the refrigerator.

$28.37

Evaporator Fan Blade

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of plastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.

$6.17

SCREW-SHOULDER

Sold individually.

$0.54

SCREW-#8-18 X 1/2

All Parts for the PHS69EHSS3
15-28 of 311