Models > PHS68EJSB0 > Instructions

PHS68EJSB0 Frigidaire Refrigerator - Instructions

All installation instructions for PHS68EJSB0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the PHS68EJSB0
541-555 of 595
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

ice maker was cycling, but no water was getting in

  • Customer: Donni from Houston TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Pulled out the fridge from the wall, unplugged it, and turned off the water supply. Took off the cardboard backing at the bottom of the fridge. Cleaned the dust and gunk. Unscrewed the old valve. Unplugged the 3 electrical connections. Since the new fittings for the water lines were different, we unscrewed the old ones, lopped off the nipples, and inserted the ends of the water lines into the new connections (they were super easy - just push the line in until it clicks). Reattached the valve. Reattached the cardboard. Turned water back on, and plugged in the fridge. Our ice maker still didn't make cubes, though. So I took out the fill valve from the top rear of the fridge. It had a tiny piece of ice lodged in the bend of the back, right above where it connected to the water line. I rinsed it out, reinstalled, and now we have a full bucket of ice!!

ice maker not making ice

  • Customer: Bobby from Butner NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
problem still persists part did not fix problem. made repairs recommended per your site.

broken ribon harmess cable

  • Customer: billy from glenwood AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
replaced ribon i have an enginers degree in electronics so it was pretty simple for me to just unplug the old cable and plug the new one in

Upper crisper drawer cover broke and two supports broke

  • Customer: marie from Crown point IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I was very thankful for the video that popped up when I ordered the crisper support part. It described exactly how to remove the damaged support without further damaging the inside of my regrigerator. I had the supports out and ready to go when my new part arrived. It took two minutes to do it the way it was described in the video and it worked like a charm. Thanks for the great tutorial and for putting it in a place that was accessible. Parts arrived very quickly as well. I didn't order enough supports so I had to re-order and they came quickly also.

Water was leaking where filter fit into filter base

  • Customer: Nathan from Dickson TN
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I was able to take away the trim covering the parts with a nutdriver. The base was disconnected using a phillips head screwdriver. The only real issue was how to disconnect the plastic water lines from the old base and connect them to the new one. I finally realized I just had to cut the lines where they entered the filter base because they would not pull out. I then finally understood that to install them into the new base I just had to push them in securely. The lines were long enough to do this but probably would not be long enough to install another filter base. In that event I do not know what all would have to be done. The leak had been going on for years (it only leaked when water was running to the ice machine or water dispenser). It is great having it repaired and we hope to get quite a few more years out of this old fridge.

meat drawer rail broken

  • Customer: Dale from Cincinnati OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed shelf removed old rail, installed new rail replaced shelf.

leak at one of the valves in the back of refrigerator

  • Customer: Ray from Westland MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Turned off the water supply ,pulled the plug removed two screws to access theater lines the new valve body was a little different than the original I had to cut off the end of each hose and push them in to the new connections the hoses are size and color coded replaced the two screws put the water line on plugged it in and turned on the water checked for leaks twice and replaced the back cover

drawer/pan guide cracked

  • Customer: James from Winter Park FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I simply replaced the broken drawer/pan guide and installed new pan/drawer. No tools needed as the parts literally slipped in place.

frig side freezing

  • Customer: Roberto from miami FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
checked web the termostat was given as 95% of cause purchased product, they sent thermostat . I changed it like instruction said this went well exceptthat was not the problem things still frooze. At least I tried the quick fix for 18$ which was not the problem. I called the tech wich told me parts and labor $330 damper /board plus labor which he said it's the problem. I agreed and will tell u the resuts. I tried but sometimes it's best left to the pros.

Broken Lower Crisper Shelve

  • Customer: Edward from Miami FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Went on your website, originally ordered wrong part, upon discovering my mistake you immediately voided that purchase and then I ordered the correct part. Very professional and easy.

ice maker not working and refrigerator too cold

  • Customer: John from Loxahatchee FL
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
ice maker= replaced overload,microswitch and solenoid water valves.refrigerator=replaced the thermostat.Great price on parts,very fast delivery and parts were a perfect fit.You made the job very easy. John

Frost on the ice maker/door

  • Customer: Janice from Shelton WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed the ice maker cover on the front (6 screws)...took off old parts and installed new ones....very easy... replaced front cover and no more frost build up in the freezer.

Support Broken and would not support crisper

  • Customer: Robert from Columbia SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Because of the design of the support, this could have been a difficult job. However, with the video that was provided when I selected the part, it was not a problem. All you have to do is knock the center pin through the support and remove the old support. Pull the pin out of the wall of the unit and push the new support in and drive the new pin in until it is flush. That's it!

Broken shelve

  • Customer: Robert from Lima AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Unload shelve, took out, replaced done.

Refrigerator door hinge was worn down and every time the door opened it made a loud noise that made us wonder if the door was eventually going to fall off!

  • Customer: Shirley from Oldsmar FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Once the part arrived, we followed directions to remove the refrigerator door. We removed the hinge cover which was a two-piece topping on the refrigerator. We then were able to remove the door and replace the lower Hinge Bearing. We put the door back on, replaced the cover and the door now opens and closes quietly and smoothly. We are senior citizens and not particularly "handy"....figured we saved ourselves $100. or so. Good deal.
All Instructions for the PHS68EJSB0
541-555 of 595