PHS68EJSB0 Frigidaire Refrigerator - Instructions

The bin easily slid into place. No fuss at all. It was super easy!

Slip in - less than 24 hr delivery -- thanks!

I watched the do it yourself video which helped tremendously. My husband was busy so I was able to do it myself.

No problem! Opened the package, took out the plastic bin and attached it to the door. Excellent service and really quick on the delivery. Thank you...

I changed the valve but still no ice, changed the filter also. think it was just froze. could have saved me 70 bucks

Purchased a replacement part only to find the new part had push on fitting and my part has screw on fittings. Went to Youtube where Partselect had a video on how to replace the part from screw fittings to push on fittings

Ordered on line and replaced in a matter of minutes. Since this is the second one that has broken, I ordered a spare this time.

recieved the part in a couple of days part just slipped into slots. The new door was slightly different but did fit

Fortunately, this was not hte first time to do a repair on the through the door dispensers. I turned the unit off and removed the door tray (slides out) to expose the screws for trim removal. When that is removed, you remove the circuitry and then remove the actuator and spring. It was difficult to get the new actuator in place. the "stop" which holds it in pace is not forgiviing! And that is being mild. (I remember a few explitive delitives I thought wer gone foreever! I reconnected the circuit to the panel, replaced the panel, and the tricky part was to reinsert the water hose into the dispenser hole. Good luck. When that was in, the entire unit was reeturned with the four screws. The front trim panel was replaced with four screws, and the slide in drip tray was slid in. Job done, and the power was restored. Thank goodness I had some long hemostates to control the reinsertion of the water tube!

My brother-in-law was the real hero here, he's quite the handy man. Once we realized that the loud noise and lack of cooling was the failed motor in the air damper unit we ordered the replacement after taking the entire unit and arm out of the fridge. Removing the entire damper unit was the only hard part due to the adhesive to the plastic mounting and Styrofoam insulation. Once out, we put the replacement in, reconnected the power switches and reseated the entire control unit arm into the fridge. The noise was gone and after a day the temperature in the fridge was back to 39 degrees Farenheit.

I removed the broken part and installed the new one. It took me all of 5 seconds! The service represenative who helped me get the right part for my fridge was very, very patient and courteous. Would i buy anything else, absolutely!!! Thank you for great service!

took old valve off one peice of it was broke off from freeze replaced it with new valve all but one conection was quick connect electric connections were color coded quick fix works fine thanks Gary

Although I hated spending nearly $100 for two fridge parts...I was delighted with how the process worked! The website was easy! The parts came quickly! They were correct and EASY to install! My wife and I are VERY happy with our experience!

Not long after we bought this fridge, the plastic on the light switch cracked, making the lever stick out too much so that the door wouldn't close. It's been taped down ever since. I simply pulled the old switch out and plugged the new one in. I'm kicking myself that I didn't do this ages ago. It was so easy and now I can see inside my refrigerator again.

Super easy - just slide in. Wonderful company - part was here next day!