Models > PGT193UW (P1131602N W)

PGT193UW (P1131602N W) Amana Cooktop - Overview

Get Parts and Repair Help for PGT193UW

If you know the cooktop repair part you need, you can browse the list of all parts on the PGT193UW, or you can search by name or part description. You can also find your part by where it is located on the PGT193UW by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$39.95

Surface Burners Spark Module Kit

$3.82

Nut

Filter Assembly

This filter assembly is just under eleven inches long and is not quite six inches wide. It is a metallic filter and it is used with some downdraft ranges.

$34.80

Spark Switch

This switch is used with gas ranges and ovens. The part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.

GRATE, SPLIT GRILLE-GAS (BL)

Surface Valve

Valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.

VALVE, SURFACE BURNER

DISCONTINUED

SELECTOR SWITCH

GROUND PIN XST311 KGT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The old valve was frozen in the off position.

  • Customer: Scott from Plymouth MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 9 of 11 people found this instruction helpful
I pulled a couple of cover plates off with a nut driver, disconnected the gas line to the old valve and installed the new one. It was simple--I should have done this years ago! My wife still hasn't discovered the repair. I'll see if I can pull this off as a Christmas gift!! read more

gas burners and gas oven would not light

  • Customer: nicholas from livermore CA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 7 of 8 people found this instruction helpful
unplug the oven and pull it away from the wall. looking at the oven from the back, the spark module is at the bottom on the lower left. there is a two piece sheetmetal cover over the area of the spark module. use a phillips head screwdriver to remove five screws and the covers come off. the spark module is the blue cube with four push on wire connectors.... read more

The range burners would not catch a spark and ignite. They would just keep clicking with no ignition.

  • Customer: Adrienne from Lake Havasu City AZ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 3 of 3 people found this instruction helpful
I had an appliance repair rep do the replacement. He made it look relatively easy.
The repair man first turned off the breaker to the range and confirmed there was no power to the range.
After lifting off the range top cover exposing the burner igniters, he unhooked and removed the igniters. He opened the lower oven door exposing the screws whi... read more