Models > PGT136UD (P1131464N D)

PGT136UD (P1131464N D) Amana Cooktop - Overview

Get Parts and Repair Help for PGT136UD

If you know the cooktop repair part you need, you can browse the list of all parts on the PGT136UD, or you can search by name or part description. You can also find your part by where it is located on the PGT136UD by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the PGT136UD [Viewing 1 of 1]

$119.12

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Electrode Retaining Clip

This clip is well under an inch in diameter. It is made of metal and it will help secure a range's electrode.

CAP, BURNER (LARGE)

CAP, BURNER (SMALL)

SCREW

KNOB GAS VALVE

DISCONTINUED

SPARK SWITCH

SPARK SWITCH

VALVE RF

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burners kept clicking after ignited

  • Customer: Robert from Ranchos de Taos NM
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 17 of 22 people found this instruction helpful
After I bought this part, installed it and the clicking still did not stop I finally found the problem. If your ignitor can still click then it's still good. The problem is the electric connection between the head burners and the base burners (Top Assembly diagram). Put a little weight on the head burner while grabbing it with your hand and grind it into the... read more

Replace igniter

  • Customer: richard from aurora CO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Pull the knobs, undo the torx nuts, fish out the ones I dropped into the cooktop; pull the panel to reveal the igniter module; undo the three nuts holding it - then transfer the wires one-by-one to the new module; fish out the screws with the magnet; secure the new igniter; replace the panels; redo the torx nuts; fish out the once I drop (AGAIN) and we're go... read more