This OEM ice and water filter fits side-by-side and bottom-freezer GE models. The most common reason you would need to change this part is if you have never updated your model and it is no longer filt...
The French door divider spring fits most Samsung French door style refrigerators. The spring applies tension between components in the refrigerator, which engages and retracts the door flap. This will...
This is a replacement spring pin for French door-style refrigerators. This part is made of white plastic and is approximately ½ an inch in length. If the mullion that keeps the doors closed is not wor...
This is the replacement pantry flip lid cover for your refrigerator. It is made of clear and white plastic and is approximately 30 inches in width and 6 inches in length. The pantry flip lid cover is ...
This part is the replacement French door hinge for your refrigerator. It is made of white plastic and is approximately 1 ¼ inch by 1 inch. The French door hinge can also be known as the flipper hinge....
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
Assembly CASE-ICE ROUTE
This dispenser ice chute door and funnel assembly is for refrigerators.
Dispenser ice chute door and funnel assembly opens to let ice through when dispensing into a glass ...
$286.87
In Stock
Questions And Answers for PFSS6PKXDSS
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
October 19, 2023
I’m looking for just the pull out tray with auger Can you help?
Thanks John
For model number PFSS6PKXDSS
Hello John, thank you for the question. The ice bucket assembly for your model is part number PS2371090. We hope this helps.
My fridge stopped making ice, then stopped cooling both fridge & freezer. What could be the issue? And how do i fix if fixable?
For model number PFSS6PKXDSS
Hello Sheli,
Thank you for your question. Our sources suggest that one or more of the 4 temperature sensors may be faulty in your model. We suggest checking all four sensors with a multi-meter to find out which sensor is defective for your model. We hope this helps!
My GE profile refrigerator keeps freezing up in the back panel I changed One sensor and it seems to be still doing it I changed the drain tubes also way to the bottom none of them are iced up but now they are getting nice iced up just don't know what to do with this anymore
For model number PFSS6PKXDSS
Hi Victor, thank you for reaching out. According to our research, the issue is most likely related to the defrost thermostat, part number PS2322735. We hope this sorts out your problem!
Unscrew old filter and remove(counterclockwise). Line up arrow on new filter with arrow on connection housing. Turn clockwise till resistance met. Do not overtighten. Follow directions. Simple.
First, I have to say I live in the next state over, and I recieved the parts the next day. Yeah! OK, I removed the adjacent drawers *and the removable lower storage shelves on the doors for clearance*. Taking out the broken lid is easy. The new one is a tight fit. The right side has a raised pad on the pivot point, but the left one d
... Read moreoes not. I worked the peg (pivot point) in on the right side and slowly and carefully pushed the stationary plastic left side in slightly(and sprung the lid slightly) to get enough clearance to get in the left peg without breaking the new lid pivot. While doing this, one has to make sure the shelf immediately behind the lid is in place since there are support tabs located on it, and you will have to rework the thing if you don't get them to mate on the installation.