This OEM ice and water filter fits side-by-side and bottom-freezer GE models. The most common reason you would need to change this part is if you have never updated your model and it is no longer filt...
The French door divider spring fits most Samsung French door style refrigerators. The spring applies tension between components in the refrigerator, which engages and retracts the door flap. This will...
This is a replacement spring pin for French door-style refrigerators. This part is made of white plastic and is approximately ½ an inch in length. If the mullion that keeps the doors closed is not wor...
This is the replacement pantry flip lid cover for your refrigerator. It is made of clear and white plastic and is approximately 30 inches in width and 6 inches in length. The pantry flip lid cover is ...
This part is the replacement French door hinge for your refrigerator. It is made of white plastic and is approximately 1 ¼ inch by 1 inch. The French door hinge can also be known as the flipper hinge....
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
Assembly CASE-ICE ROUTE
This dispenser ice chute door and funnel assembly is for refrigerators.
Dispenser ice chute door and funnel assembly opens to let ice through when dispensing into a glass ...
$286.87
In Stock
Questions And Answers for PFSS6PKXCSS
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rob
November 18, 2022
I’ve installed an RO filter on our home water supply line. Would like to permanently remove the water filter on the refrigerator. Do I need a filter bypass? If so, can you give provide a part #.
For model number PFSS6PKXCSS
Hello Rob, thank you for your question. Yes, you need a water filter bypass, part number PS12727272, in order to install an external RO filter to your refrigerator. Please reach out to customer service if you need help placing an order. Glad to be of help!
Hi Judy, thank you for the question. We have found that you may have to prime the water for efficient use. If you just installed your refrigerator, it is connected to a water supply so it can produce ice and dispenser water. However, air can be trapped in the new plumbing lines, which can result in 2 or 3 empty ice maker cycles. Furthermore, if the system is not primed, the first ice cubes may be discolored or have an odd flavor. It will also prohibit the water from initially flowing from the dispenser. We hope this information helps!
Was this helpful?
Thank you for voting!
Buddy
November 20, 2023
Ice maker does not make ice all the time and leaks water at bottom
For model number PFSS6PKXCSS
Hello Buddy, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the water lines for any leakage. If this is not the issue, we would suggest replacing the water inlet valve, part number PS2374812, to solve the problem. We hope that helps!
Back of refrigerator there are two defrost drain line but one of the defrost drain line is clog.I do not know clog line is frigid or freezer drain iine.
For model number PFSS6PKXCSS
Hello Bhupendra and thank you for writing.
As one of them is clogged you will have to replace the drain line, it comes as a kit (as it is recommended to change both drains at the same time) part number: PS2344342 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
Unscrew old filter and remove(counterclockwise). Line up arrow on new filter with arrow on connection housing. Turn clockwise till resistance met. Do not overtighten. Follow directions. Simple.
First, I have to say I live in the next state over, and I recieved the parts the next day. Yeah! OK, I removed the adjacent drawers *and the removable lower storage shelves on the doors for clearance*. Taking out the broken lid is easy. The new one is a tight fit. The right side has a raised pad on the pivot point, but the left one d
... Read moreoes not. I worked the peg (pivot point) in on the right side and slowly and carefully pushed the stationary plastic left side in slightly(and sprung the lid slightly) to get enough clearance to get in the left peg without breaking the new lid pivot. While doing this, one has to make sure the shelf immediately behind the lid is in place since there are support tabs located on it, and you will have to rework the thing if you don't get them to mate on the installation.