This OEM ice and water filter fits side-by-side and bottom-freezer GE models. The most common reason you would need to change this part is if you have never updated your model and it is no longer filt...
The French door divider spring fits most Samsung French door style refrigerators. The spring applies tension between components in the refrigerator, which engages and retracts the door flap. This will...
This is a replacement spring pin for French door-style refrigerators. This part is made of white plastic and is approximately ½ an inch in length. If the mullion that keeps the doors closed is not wor...
This is the replacement pantry flip lid cover for your refrigerator. It is made of clear and white plastic and is approximately 30 inches in width and 6 inches in length. The pantry flip lid cover is ...
This part is the replacement French door hinge for your refrigerator. It is made of white plastic and is approximately 1 ¼ inch by 1 inch. The French door hinge can also be known as the flipper hinge....
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathie
February 25, 2020
My freezer is not freezing, my ice maker is not working, and now the refrigeration section is not cooling. I have had a&e services come in and looking at it. So far i have had 6 techs come to my house. They finally said it the condenser and compressor. Now i am told that GE does not have the parts. This has been going on since dec. 6, 2019. I am trying to fine out if you do have parts for my GE profile.
For model number PFSS6PKXBSS
Hello and thank you for writing.
We are very sorry to hear about your troubles. Here are the part numbers for your unit.
The compressor is part number PS2323628.
The condenser is part number PS2355002.
We hope this information helps. Please contact us anytime if you require further assistance.
The main board have been making beeping sounds for about a month. Woke up this morning refrigerator and freezer are warm
For model number PFSS6PKXBSS
Hello, Thank you for your question. You will want to check into the temperature sensor. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Darlene
June 7, 2023
The main computer in fron of fridge is beeping and switching between ice and water mode? I can’t get it to stop, even after unplugging the fridge?
For model number PFSS6PKXBSS
Hi Darlene, thank you for the question. The continuous switching and beeping are caused by the faulty dispenser control panel. We recommend you replace the dispenser control panel, part number PS2344348, to fix the issue. We hope this information helps!
Drain in fresh food section plugs up with ice. I unplugged drain but days later it freezes up again
For model number PFSS6PKXBSS
Hello Glen, Thank you for the question. This normally indicates there is a blockage in the Drain Tube and not allowing the water to drain properly and freeze up. We hope this helps!
My refrigerator does not dispense water. Is it flap door gone bad creating the problem? Please advise. Thank you.
For model number PFSS6PKXBSS
Hi Ex, thank you for reaching out. We have researched and found that you may need to check the ice and water filter, part number PS8746144, and replace it if necessary. We hope this solves your problem!
Unscrew old filter and remove(counterclockwise). Line up arrow on new filter with arrow on connection housing. Turn clockwise till resistance met. Do not overtighten. Follow directions. Simple.
First, I have to say I live in the next state over, and I recieved the parts the next day. Yeah! OK, I removed the adjacent drawers *and the removable lower storage shelves on the doors for clearance*. Taking out the broken lid is easy. The new one is a tight fit. The right side has a raised pad on the pivot point, but the left one d
... Read moreoes not. I worked the peg (pivot point) in on the right side and slowly and carefully pushed the stationary plastic left side in slightly(and sprung the lid slightly) to get enough clearance to get in the left peg without breaking the new lid pivot. While doing this, one has to make sure the shelf immediately behind the lid is in place since there are support tabs located on it, and you will have to rework the thing if you don't get them to mate on the installation.