Order within the next 5 hrs and your part ships today!
Questions And Answers for PEM31DF1WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
21 days ago
Bad rusty door, what to do?
For model number PEM31DF1WW
Hi Mark, thank you for contacting us. We would suggest cleaning the rust and then sand it down so that there is no rust or paint left. Then use some microwave cavity paint and spray over the area to re-paint the sanded down area. If the issue persists, you may need to replace the door. The door assembly for your model is part number PS875569. We hope that helps!
Slide a Butter knife at left side by open push knob door will open. Then open all screws from top cover push cover top side front way then door locks Bracket have 3 microswitch pulls out switches mark them top medium and bottom. Remove 3 screws holding brackets will come out. On bottom see a Cam has 1/4” holes can holding Saft broken then
... Read more install new door lock bracket install microswitch put 3screw and slide Cam on saft . I put a small screw on saft to hold cam on place. There was no screw . That’s why cam saft was broke. Put top cover tight all the screws and door lock fixed.
I used small wire cutter I use in fly tying hobby. The metal was easy to cut. When cover was removed I unplugged the motor,removed it and plugged the new one in. To replace the cover -- reverse it,place the 2 tabs on one edge into the slots that are already part of the base. On the opposite edge there is a domed shaped tab with a h
... Read moreole in center. Place the small screw that was provided back in and thighten. Your Done
