Models
>
PEB9159DJ2BB
PEB9159DJ2BB General Electric Microwave - Overview
Sections of the PEB9159DJ2BB
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Microwave Fuse
PartSelect #: PS3486694
Manufacturer #: WB27X11138
This fuse is for microwaves. Fuse protects the microwave from damage by shutting off the microwave if there's a power surge.
$57.94
In Stock
Microwave Glass Turntable Tray
PartSelect #: PS3486810
Manufacturer #: WB39X10032
This turntable tray is for microwaves.
Turntable tray rotates in the center of the microwave to help ensure the food cooks evenly.
Follow the instructions in the owner's manual when installing this part.
$149.53
In Stock
Microwave Door Interlock Switch Bracket
PartSelect #: PS3486543
Manufacturer #: WB14X10049
The door interlock switch bracket houses and supports the door switches.
$40.70
In Stock
Microwave Turntable Motor
PartSelect #: PS12722592
Manufacturer #: WB26X32190
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge...
$114.20
In Stock
Microwave Turntable Motor Coupler
PartSelect #: PS8753744
Manufacturer #: WB06X10925
The turntable motor coupler connects the turntable motor to the turntable tray to rotate the tray.
$39.29
In Stock
Microwave Electronic Control Board
PartSelect #: PS12295369
Manufacturer #: WB27X29822
$197.50
In Stock
Questions And Answers for PEB9159DJ2BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bard
June 26, 2023
How do I open or take off the control panel to get to the door switches for replacement?
For model number PEB9159DJ2BB
Hi Brad, thank you for contacting us. We would suggest following these general instructions for control panel disassembly: Remove the top grill by unscrewing the screws holding it. Lift the control panel to detach it. Make sure to note down the wiring connections before removing the wires from the control board. Pull out the plugs and remove the door switch bracket to replace the switches. We hope this helps!
Was this helpful?
Thank you for voting!
Edward
October 24, 2023
Microwave tray does not rotate Microwave does not heat Neither convection heat or microwave geat
For model number PEB9159DJ2BB
Hello Edward, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the main control board, part number PS12295369. We hope this helps, good luck with the repair!
Was this helpful?
Thank you for voting!
Related Parts:
Microwave Electronic Control Board
$197.50
In Stock
Clarence
November 29, 2023
The keypad works sometime, and sometimes it doesn’t work
For model number PEB9159DJ2BB
Hello Clarence, Thank you for your inquiry. Researching your model, it could be an issue with the touchpad (which is only available as part of the control panel assembly) or the control board. Check for any visible damage or loose connections. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
CONTROL PANEL Assembly
$253.91
In Stock
Microwave Electronic Control Board
$197.50
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the PEB9159DJ2BB
[Viewing 3 of 3]Won’t turn on
Fixed by
these parts
these parts
Show All
Door stuck closed
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave door was hard to open
1. Take out the case by unscrew 8 screws on the back and side of the case
2. Take out the control panel by unscrew 1 screw on the top and slide up
3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch
4. Clip the switches onto the new latch
5. Slide in lever switch into ... Read more latch
6. Put back the latch
7. Put back the control panel
8. Put back the case
2. Take out the control panel by unscrew 1 screw on the top and slide up
3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch
4. Clip the switches onto the new latch
5. Slide in lever switch into ... Read more latch
6. Put back the latch
7. Put back the control panel
8. Put back the case
Read less
Parts Used:
-
Henry from NORWALK, CT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door locks. Not opening.
Slide a Butter knife at left side by open push knob door will open. Then open all screws from top cover push cover top side front way then door locks Bracket have 3 microswitch pulls out switches mark them top medium and bottom. Remove 3 screws holding brackets will come out. On bottom see a Cam has 1/4” holes can holding Saft broken then
... Read more
install new door lock bracket install microswitch put 3screw and slide Cam on saft . I put a small screw on saft to hold cam on place. There was no screw . That’s why cam saft was broke. Put top cover tight all the screws and door lock fixed.
Read less
Parts Used:
-
Jay from WESLEY CHAPEL, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Installed waveguide
-
Jason from KIRKLAND, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!