PEB7226DF2WW General Electric Microwave - Overview

First, I read the PartsSelect DIY report by Linda, Warsaw, IN. With confidence, I purchased the magnetron. Upon receipt, I took the built-in microwave out of the cabinet, set the unit on the kitchen floor, and was stopped cold by the Safety Torx nuts on the reverse of the unit. Borrowing the right wrench allowed the 20 minute start-to- ... Read more finish part changeout and reinstallation of the unit in the cabinet to proceed. The old magnetron was the defective part. Discovery of the 10-year Parts-Only warranty on the less than 10-year old unit was insufficinet to guide me to take the unit in for their Labor bill to repair. New part in hand, it just was that easy - and assumed to be no less expensive.

easy to handle

1. Unplug the microwave, or cut power at the fuse box.
2. Clean the microwave in case there is any food splatters or residue.
3. Using a flathead screwdriver, pop off the plastic rivets that hold the waveguide cover in place. They should not take much to pop out.
4. Replace the damaged waveguide cover with the replacement, ... Read more reinsert plastic rivets.
5. Restore power to the microwave and test.