Models > PEB2060SM2SS > Symptoms > Tray won’t turn

Parts That Fix General Electric Microwave PEB2060SM2SS Tray won’t turn

Tray won’t turn is a commonly reported symptom for the PEB2060SM2SS General Electric Microwave, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your PEB2060SM2SS General Electric Microwave that will fix Tray won’t turn. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Rotating Ring Assembly
Fixes Symptom 69% of time
Rotating Ring Assembly – Part Number: WB06X10633
★★★★★
★★★★★
35 Reviews

Rated by 5 customers 

  

Very Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.   

This is the rotating ring assembly for your microwave. It rests under the glass tray, and allows it to rotate so your food can cook evenly. If you notice that your food is not cooking evenly or if the tray does not rotate, a damaged rotating ring assembly could be the cause. Occasionally, the wheels on the rotating ring assembly will wear down and this can prevent it from turning. This part is approximately 8 inches in diameter and is sold individually.

$ 22.53
  In Stock
PartSelect Number PS1021750
Manufacturer Part Number WB06X10633

Customer Repair Stories

Broken wheel

Swapped new part with broken part.
  • Richard from LAFAYETTE HL, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

The glass plate in the microwave wouldn't rotate.

So simple!! I took the glass plate out of the microwave and removed the plastic part that it was sitting on and installed the new part. I put the glass plate back in and turned the microwave on and the glass plate started to rotate just like it was supposed to. The wheels on the old part had become flat and that's why it wouldn't rotate. No tools were needed.
Read less
  • Gretchen from RANDOLPH, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 Synchronous Motor
Fixes Symptom 27% of time
Synchronous Motor – Part Number: WB26X10143
★★★★★
★★★★★
10 Reviews

Rated by 5 customers 

  

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.   

This motor rotates the glass turntable in the microwave.

$ 17.60
  In Stock
PartSelect Number PS953598
Manufacturer Part Number WB26X10143

Customer Repair Stories

Turn table won't turn.

Turntable in the microwave stopped turning.
  • Gerald from Fort Eustis, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
12 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Turntable erratic, noisy, and stopped with weight

The turntable made a clicking noise, sometimes turned in the wrong direction, and wouldn't turn when there was any weight on the plate. Nothing appeared broken in the 3 spoked thing on whcih the plate sits. I replaced the motor, but this did not fix the problem; everything works fine until I put on the plate or any food on the plate. I now suspect that the wheels of the 3 spoked thing have worn down. They have flat spots on them. They don't turn when the motor turns, but drag. I suspect that this drag was what striped my first motor. I will next replace the 3-spoked thing.
Read less
  • Michael from San Antonio, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
3 Primary Door Interlock Switch
Fixes Symptom 4% of time
Primary Door Interlock Switch – Part Number: WB24X10047
★★★★★
★★★★★
18 Reviews

Rated by 19 customers 

  

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.   

This interlock switch is located in the door latch.

$ 33.44
  In Stock
PartSelect Number PS237015
Manufacturer Part Number WB24X10047

Customer Repair Stories

Microwave would turn on and count down, but not heating and not rotate turntable. Pressing door up would occasionally start heat.

First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reconnect wires, reseat latch mount by placing top bracket tab in place first, allign and secure with screws. Reseat touch pad by placing bottom tabs in first, tilt forward and press up to seat top tabs, secure with top screw. Secure vent louver screws, plug in and watch your microwave work again.
Read less
  • Michael from Ridgefield, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
37 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Microwave runs with the door open

Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover
and test to see if that solved the problem. If so then well done!!
  • Thomas from Andover, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
35 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top