Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PDW9280J00SS > Parts

PDW9280J00SS General Electric Dishwasher - Parts

All parts for the General Electric Dishwasher PDW9280J00SS

Below is a list of all parts for the General Electric Dishwasher PDW9280J00SS. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the PDW9280J00SS
29-42 of 124
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Sump Filter and Cover

This works in conjunction with the pump and filtration system. It is used to filter the drainage for disposal.


Hose Clamp Kit

This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.



This upper rack wheel is sold individually. It is gray in color and does not come with the attaching axle.


Upper Dishrack Inner Rail

This slide is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack.


Spray Arm Bearing


Water Inlet Valve

May look different than the original, but will function the same.


Middle Spray Arm Kit with Hub


Hinge Cup



This clamps the drain pump port to the sump inlet port to hold it in place.




Leveling Leg

This leveling leg is located under the dishwasher cabinet. It is sold individually.


Check Valve Flapper



Helps hold the middle spray arm onto the bottom of the rack.


Spray Arm Support

This support is for the middle spray arm.

All Parts for the PDW9280J00SS
29-42 of 124