Models > PDW9280J00SS > Instructions

PDW9280J00SS General Electric Dishwasher - Instructions

All installation instructions for PDW9280J00SS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the PDW9280J00SS
106-120 of 292
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Wheels fell off the bottom rack of dishwasher

  • Customer: Cody from Mount Dora FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Couldn't have been easier-snap, snap, snap.Took advice of another post and put the wheel and axle part together before snapping onto rack. !

Broken wheel

  • Customer: Douglas from Cincinnati OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 1 people found this instruction helpful
Fixed in no time, parts arrived in a day!

broken wheels on dishwasher rack

  • Customer: tom from stratford CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
parts fit perfect easy to install and your shipment was quick

The axles on the rack wheels kept coming unclipped

  • Customer: Gale from Highlands Ranch CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
I set the rack upside down on the counter. Snapped the new axles into the new wheels. Snapped the wheels onto the rack. The new style axles are better than the factory parts. They look different in the picture so I was not sure if I was getting the right thing but they worked great. Took longer to take the parts out of the bags than to install. Nice to have the rack slide in and out properly again.

The wheels fell off the bottom rack of the dishwasher

  • Customer: Rebecca from West Friendship MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
The replacement studs that were suggested fixed the problem that we were having. The fix was easy and took less than ten minutes to take the broken studs out and snap the new ones into place. The studs are designed to hold onto the rack much tighter than the original studs and completely fixed the problem of the wheels falling off anytime you tried to move the bottom rack.

The lower rack wheels kept coming off

  • Customer: Eric from Germantown MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
I examined the wheels and noticed that they were actually fine, it was just the clip on axles that had worn out. I had recently used a dishwasher cleaner, I think that was the straw that broke the camels back. The replacement axles that I ordered were actually a bit different than the original. It turns out they had been greatly improved, so the new ones snapped easily into place by hand. The lower rack rolls perfectly, like new!

original wheel fell off and melted

  • Customer: Susan from Wenham MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
I took the parts, put them together in literally a minute and they worked like a charm. All for under $10. I am kicking myself for not doing it sooner. I had gone to a big DIY store where they flipped a parts card for me to call. I went online - found you had my parts, ordered over the weekend and the parts arrived early Tuesday morning.

All of America should work as well!!!!!!!!!!!!!!!

Middle spray would not connect due to lost washer/screw

  • Customer: Marie from Elk Grove CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench(Adjustable)
  • 1 of 4 people found this instruction helpful
Reference diagram of upper rack assembly. Remove the top rack (615) from the upper rack rails of dishwasher by unlatching cap ends (652) of rails. Then unlatch and unscrew middle spray arm bracket (620) on old arm spray hub (610) from conduit mid spray (617). Replace old arm spray hub with new one from kit. Next, attach new arm spray mid asm (618) with new bearing spray arm screw (611). Finally reinstall top rack onto upper rack rails and closed latches of cap ends.

Needed new wheels

  • Customer: Jason from Omaha NE
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
I inserted wheel axle into wheel and attached to bottom rack axle. It was simple. No problems.

Rack does not roll correct, falls into tub

  • Customer: Damon from Austin TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Removed old wheels and axles, installed new axles in wheels, clipped into place. I purchased new wheels and axles. Probably only needed the axles. The front wheels are narrower than the rear wheels. This probably contributes to them falling off the track. Since I purchased 8 new wheels (all wide, now I know what the second part number was for)I put all wide on. Seems to be more stable that way. New straight style axle clip appears more robust than the old side clip style. Thanks Parts select

worn out wheels and axles

  • Customer: steven from westbrook CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
pop of the old, pop on the new! Wife happy, Priceless

The wheels kept falling off the bottom rack of the dishwasher

  • Customer: Suzanne from Oak Ridge NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
My husband took off all the wheels and changed the axles. We had friends who had the same problem and they led us to your web site.

Front right wheels falling off lower dishwasher rack

  • Customer: Valerie from Puyallup WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
The two lower right wheels kept falling off, then one fell down and was partly melted by the heating unit on the bottom. I went on line,read some of the do it yourself repairers to see what they did. Looked up the parts, (used the back wheels to put on the front)ordered it, delivery was just a few days and within 10 minutes done. It was just that easy. Thank you for making it that easy, a lot of us are trying to save where we can these days and that helped a lot.

Broken axle/wheels on lower basket

  • Customer: Johnny from Edmond OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
It took longer to unpack teh parts than it did to repair. Simply snaped the wheels onto the axels and then snaped the assembled units axle supports on the lower basket. Reinstalled the lower basket in the dishwasher tub and all is great.

wheels kept falling off

  • Customer: alexander from bethesda MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
New wheels are snap on, do not fall off, great repair
All Instructions for the PDW9280J00SS
106-120 of 292