Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PDBL390AWZ

PDBL390AWZ Maytag Dishwasher - Overview

Get Parts and Repair Help for PDBL390AWZ

If you know the dishwasher repair part you need, you can browse the list of all parts on the PDBL390AWZ, or you can search by name or part description. You can also find your part by where it is located on the PDBL390AWZ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for PDBL390AWZ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Handle and Latch Assembly with Switches

This part includes the black handle, latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. NOTE: White ha...


Lower Wheel Assembly

This lower dishrack roller is less than two inches in diameter. It is made entirely of plastic.


Door Latch with Switches - NO Handle

This is the door latch and switches only. The handle is not included with this part.


Door Seal - Black

It provides a waterproof seal between the tub and the door.


Inner Door Foam Insulation Strip

Helps prevent leaking from the door area.


Hose Clamp


Docking Station with Flappers

The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.


Door Cable Link


Water Inlet Valve

The valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amoun...


Rail Stop

This part is at the end of the rails to stop your dishrack from being pulled all the way out. Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Handle jammed and door wouldn't open on Maytag Quietseries 100 dishwasher

  • Customer: Philip from Carlsbad, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 531 of 543 people found this instruction helpful
I Followed others' instructions already posted to replace the whole handle assembly. In particular, use a big screwdriver placed against the bottom of the handle and whack the grip with the palm of your hand to get the handle to move back to the open position so you can open the door and start the job. I am no handyman, but this fix was easy, about 30 minu... read more

2 broken wheels on basket

  • Customer: jeanne from waynesboro, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 366 of 369 people found this instruction helpful
unwrapped wheels ,pulled out drawer and easily put on new wheels...as we live way out in the boonies it was great to be able to order parts and have them delivered so fast...easy to fix.... read more

Latch handle broke due to Latch Assembly worn

  • Customer: Dennis from Austin, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 283 of 361 people found this instruction helpful
This repair was fairly quick and easy. The parts are much better made than the stock Maytag. The parts from PartSelect came lightening quick! Never used before, always Sears, but will ALWAYS use from now on!
So, first, make super sure all power is disconnected. Then take the torx and remove all the screws on interior front cover - the top center two... read more