Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PDB4600AWN

PDB4600AWN Maytag Dishwasher - Overview

Get Parts and Repair Help for PDB4600AWN

If you know the dishwasher repair part you need, you can browse the list of all parts on the PDB4600AWN, or you can search by name or part description. You can also find your part by where it is located on the PDB4600AWN by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for PDB4600AWN parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Latch Hook

$8.45

Silverware Basket Handle - White

$7.40

Lower Wash Arm Cap

You have to turn the part counter-clockwise to remove.

$8.01

Jump Up Nozzle

$5.38

Actuator Lever

$21.48

Motor Shaft Seal

This seal has a rubber exterior and a metal interior.

$6.87

Actuator Lever Pivot Pin

$4.63

Access Panel Insulation

$4.79

DIVERTER-

Lower Spray Arm Seal

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water dripping from right corner of door

  • Customer: Tim from Ringgold, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 550 of 558 people found this instruction helpful
Took out about 7 torx screws to remove the inner door liner. Discovered evidence of leak coming from the sop dispenser latch, and noticed the grommet had turned soft and was torn. The grommet is only about 1" square. Used nut driver to remove two screws to remove latch assembly. Slipped old grommet off and put new one on, and reattached the latch. The foam s... read more

Rack roller broke

  • Customer: Kathy from Lombard, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 481 of 482 people found this instruction helpful
I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks read more

The dishwasher roller axle needed to be repaired

  • Customer: Rosemary from Toms River, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 370 of 372 people found this instruction helpful
I watched the installlation video found on the wedsite and followed his directions. read more