Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PCT916BM1BB

PCT916BM1BB General Electric Wall Oven - Overview

Get Parts and Repair Help for PCT916BM1BB

If you know the wall oven repair part you need, you can browse the list of all parts on the PCT916BM1BB, or you can search by name or part description. You can also find your part by where it is located on the PCT916BM1BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for PCT916BM1BB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the PCT916BM1BB

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$15.47

Oven Sensor

The function of the oven sensor is to detect the temperature within the oven cavity. If you notice that the oven is too hot or too cold, or it is not heating evenly, you may need to replace the oven sensor. The oven sensor is typically located in the back of the oven so you will most likely need to pull your oven out to access it. Many of our customers have rated this repair as easy. You will need a Phillips screwdriver to complete this repair. Be sure to disconnect the power source and shut off the gas valve before doing this repair.

$18.39

Oven Light Housing

The light housing is also known as a lamp holder and is a part for the oven in your range. The function of this piece is to hold the bulb that will light up the inside of your oven...

$4.56

Oven Bulb Lens Cover - Glass

$2.06

Screw

This screw is sold individually.

$40.48

WINDOW PACK ASM

$3.46

Screw

Sold Individually.

$3.21

Screw

Sold Individually.

$34.13

Meat Probe Thermistor

$30.23

Door Gasket

This oven door gasket prevents heat from escaping the oven cavity when in use.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven was not coming up to temperature

  • Customer: Sean from Highlands Ranch, CO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 36 of 41 people found this instruction helpful
I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wall. Overall, a very e... read more

F2 error code

  • Customer: George from Fiskdale, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 11 of 14 people found this instruction helpful
After reviewing the potential causes for the error code, I decided I'd try to change out the temp sensor. Using the ohmeter, I saw the difference immediately between the old and new sensor. The sensor is accessed from the back of the stove, and must be slide out to gain access to the rear panel. Since the stove I have is a built in, removing the stove and... read more

Oven Lamp Holder Burned

  • Customer: Jack from Okmulgee, OK
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 10 of 11 people found this instruction helpful
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions. read more