Models > PAVT244AWQ

PAVT244AWQ Maytag Washer - Overview

Get Parts and Repair Help for PAVT244AWQ

If you know the washer repair part you need, you can browse the list of all parts on the PAVT244AWQ, or you can search by name or part description. You can also find your part by where it is located on the PAVT244AWQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the PAVT244AWQ [Viewing 1 of 1]

$2.70

Screw

This screw is sold individually.

$17.82

Timer Knob

$18.22

Selector Knob

$51.32

Pressure Switch

This part senses how much water is in the tub and allows it to reach the desired level. For example: A little water equals little pressure and a lot of water means more pressure inside the switch.

$20.10

Timer Skirt

White in color.

$156.82

Timer

$40.14

SWTCH-TEMP

ENDCAP WH

ENDCAP WH

SWITCH-CYC

Common Symptoms of the PAVT244AWQ [Viewing 1 of 44]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Overfilling causing flooding

  • Customer: Robert from Framingham MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 4 of 8 people found this instruction helpful
Unplug from power Source,turn off water supply,Remove 3 screws that hold the Control Panel in Place.Remove knob, lower assembly, unplug wire Connector,using pliers , compress vacuum hose clamp,remove vacuum hose,remove screw holding switch in place,depress plastic tab that prevents movement,twist switch assembly to remove.Reverse procedure to install new swi... read more

Washmachine Timer Knob broken by Homo sapiens

  • Customer: Edward from Cupertino CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 3 of 8 people found this instruction helpful
Unplug power cord first ! Unscrew the metal backplane; release the Timer Knot latch from behind with a small flat head screw driver; remove the timer knot; pop in the new timer knot; re-install the timer knot latch from behind; Screw back the metal backplane. read more

Time Knob broken during cabinet construction

  • Customer: Matthew from Tustin CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 2 of 6 people found this instruction helpful
The process was quite straight forward - simply by removing the top control panel at the back of the unit and pull out the plastic lock pin that kept the old knob wedged tight. Then install the new knob in the reverse process. That's it. read more