Models > NWXR473ET2AB

NWXR473ET2AB Hotpoint Dryer - Overview

Get Parts and Repair Help for NWXR473ET2AB

If you know the dryer repair part you need, you can browse the list of all parts on the NWXR473ET2AB, or you can search by name or part description. You can also find your part by where it is located on the NWXR473ET2AB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for NWXR473ET2AB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.94

Drum Bearing Slide

There are 2 per dryer. They attach to the outer-most sides of the bearing. Manufacture recommends to replace both slides at the same time. Sold individually.

Order within the next 5 hrs and your part ships today!
$5.91

Drum Bearing Slide - White

Sold individually. There are 2 per dryer. They attach to the outer-most sides of the bearing. Manufacture recommends to replace both slides at the same time.

Order within the next 5 hrs and your part ships today!
$5.55

Duct Felt Seal

Order within the next 5 hrs and your part ships today!
$4.05

D-Shaped Knob Insert Clip

Sold individually.

Order within the next 5 hrs and your part ships today!
$19.98

Drive Belt

This drive belt is 89.5" long.

Order within the next 5 hrs and your part ships today!
$3.79

Light Bulb - 120V 10W

Order within the next 5 hrs and your part ships today!
$46.29

Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running...

Order within the next 5 hrs and your part ships today!
$35.25

Lint Filter and Frame

Order within the next 5 hrs and your part ships today!
$35.66

Rotary Start Switch

This part is used to start the dryer once you have selected a setting on the timer.

Order within the next 5 hrs and your part ships today!
$15.39

Idler Pulley Wheel

A dryer's idler pulley wheel serves to help the belt to rotate the drum.

Order within the next 5 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Due to over loading of the dryer the drum ruined the slides and was making a bad noise due to plastic rubbing plastic

  • Customer: Matthew from Plainfield IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 510 of 519 people found this instruction helpful
It was pretty easy. After already taking apart the dryer to install a new belt I knew exactly my plan of action. I removed the two screws that hold the top panel of the dryer to the front panel. I then removed the top panel and removed the screws that hold the front to each side panel. I than pulled the front away from the cabinet and drum. I put the ne... read more

Dryer was squeeling when running.

  • Customer: Daniel from Chicago IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 446 of 450 people found this instruction helpful
I removed the two screws at the front above the drum opening (with the dryer door open). The top panel then lifts off. I removed the screw at each side that holds the front panel to the side panels, tilted the front panel forward, which disengages the front of the drum from the front drum glide bearing. I then lifted the front panel slightly, unhooking th... read more

Intermittant squeaking noise

  • Customer: Mark from Addison IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 424 of 497 people found this instruction helpful
Basically, I followed the same steps a prior person posted.
1.Removed the two screws inside the door, on the top part of the opening.
2.Lifted up and removed the top.
3.Removed two screws holding the front panel in place.
4.Held up the drum while removing the front panel. I carefully turned the panel so I could get at the drum bearing wit... read more