Models > NWSR483EB2WW > Parts

NWSR483EB2WW Hotpoint Dryer - Parts

All parts for the Hotpoint Dryer NWSR483EB2WW

Below is a list of all parts for the Hotpoint Dryer NWSR483EB2WW - Residential Electric. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the NWSR483EB2WW
15-28 of 90
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Lint Trap Duct Assembly

This part includes the duct felt seal (PS9861764) and gasket (PS2577674). NOTE: Per manufacturer this part no longer comes with the sensor bars.



This part helps to keep the door closed while the machine is running.


Retainer O-Ring


Door Strike


Heating Element and Housing

Note: The insulators on the housing are NOT sold separately.


Door Switch

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.


Foam Seal

This is 39 inches long.


Safety Thermostat

This is considered a thermal fuse.


Adjustable Leveling Screw


Nut Cap


Knob and Clip


Terminal Block and Grounding Strap

This part is connected to the rear bulkhead of the dryer with screws. It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).


Timer Resistor


Drive Motor

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

All Parts for the NWSR483EB2WW
15-28 of 90