Models > NVLR333EV0WW > Parts

NVLR333EV0WW Hotpoint Dryer - Parts

All parts for the Hotpoint Dryer NVLR333EV0WW

Below is a list of all parts for the Hotpoint Dryer NVLR333EV0WW - Residential Electric. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the NVLR333EV0WW
15-28 of 102
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Switch

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.



This screw is sold individually.


Air Duct Felt Seal

If your dryer is making a squeaking noise this seal may need to be replaced.


Screws - Package of 12


Blower Wheel

This wheel attaches to the motor.


Timer Resistor


Drive Motor

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on...


Door Plug - White

Sold individually.


Heating Element Coil with Housing - 240V

They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The h...



This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 230 degrees Fahrenheit. The element will kick back in when the temperature drops to 200 degrees Fahrenheit - the differential of 30 degrees.


Control Knob

This knob accepts a D-shaped shaft.




Timer Knob

This knob accepts a D-shaped shaft. Sold individually.


Thermostat - Limit: 325

This one-time use safety thermostat has a limit of 325 degrees Fahrenheit. One this thermostat trips, you will have to replace it.

All Parts for the NVLR333EV0WW
15-28 of 102