Quick Question!

Have you ever purchased from PartSelect.com before?

Models > NT21L9FA (BA73A)

NT21L9FA (BA73A) Admiral Refrigerator - Overview

Get Parts and Repair Help for NT21L9FA

If you know the refrigerator repair part you need, you can browse the list of all parts on the NT21L9FA, or you can search by name or part description. You can also find your part by where it is located on the NT21L9FA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the NT21L9FA

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Shelf Trim Retainer

This door shelf trim retainer is just over one inch long. It is all white in color and it is made entirely of plastic.


Butter Dish


Food Door Gasket (measures 30-3/4" by 39')

This white fresh food door gasket measures approximately 30-3/4 inches by 39 inches. It is used on many fresh food doors of top mount model refrigerators that have been manufacture...


Door Shelf Retainer Bar - Cut to Fit

This cut-to-fit refrigerator door shelf retainer bar comes at twenty-seven inches long. It is made entirely of metal.


Door Spacer Washer



This egg tray holds fourteen eggs.



Sold Individually.

Single Flush-Mount Screw

Sold Individually. This screw holds the handle in place on the freezer door.




Common Symptoms of the NT21L9FA

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Needed To Replace Gasket/Seal On Fridge

  • Customer: Nancy from Malden, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers
  • 5 of 5 people found this instruction helpful
Most importantly make sure you get the wrinkles out of the gasket, a step we did not follow exactly, so we ended up having to work the seal a lot more to make it fit properly which of course made the repair take longer than needed. Other than that no problems here read more

Gasket wouldn't seal all the way around

  • Customer: Thomas from Mobile, AL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver
  • 4 of 4 people found this instruction helpful
Due to some deformity of the gasket, it didn't seal all the way around. The instructions suggested using a heat light to warm the gasket with the door open. That didn't work too well so I closed the door and used a heat gun lightly in the areas it didn't seal. That worked great to soften the gasket so the magnet in the gasket could pull it gasket tight to t... read more

Long time!

  • Customer: Dustin from Lake Zurich, IL
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
Well the repair was not bad the package came in real fast thank you very much. Doing the work was real hard took about an hour to do and then putting it on I do not think it stayed on good still using some duck tape to hold it and the top and bottom are real fat and will not sink on in. I do not know what to do or what I did wrong. I am kind of afraid to tak... read more