Quick Question!

Have you ever purchased from PartSelect.com before?

Models > NJSR453GW2AA

NJSR453GW2AA Hotpoint Dryer - Overview

Get Parts and Repair Help for NJSR453GW2AA

If you know the dryer repair part you need, you can browse the list of all parts on the NJSR453GW2AA, or you can search by name or part description. You can also find your part by where it is located on the NJSR453GW2AA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for NJSR453GW2AA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.97

Drum Bearing Slide - White

Sold individually. There are 2 per dryer. They attach to the outer-most sides of the bearing. Manufacture recommends to replace both slides at the same time.

Order within the next 3 hrs and your part ships today!
$44.28

Front Drum Bearing

Note: The drum slides should also be replaced when your replacing the drum bearing. Slides are NOT included. This part helps your dryer operate as quietly as possible.

Order within the next 3 hrs and your part ships today!
$8.55

Duct Felt Seal

May differ in appearance but functions same as original.

Order within the next 3 hrs and your part ships today!
$8.21

D-Shaped Knob Insert Clip

Sold individually.

Order within the next 3 hrs and your part ships today!
$22.48

Drive Belt

This drive belt is 89.5" long.

Order within the next 3 hrs and your part ships today!
$49.31

Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running as smoothly as possible with as little noise as possible.

Order within the next 3 hrs and your part ships today!
$38.01

Cycling Thermostat - 4 Wire

This thermostat helps to regulate the dryer's internal temperature. L210-30F

Order within the next 3 hrs and your part ships today!
$12.23

Interlock Switch

This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open.

Order within the next 3 hrs and your part ships today!
$36.34

Rotary Start Switch

This part is used to start the dryer once you have selected a setting on the timer.

Order within the next 3 hrs and your part ships today!
$17.27

Idler Pulley Wheel

A dryer's idler pulley wheel serves to help the belt to rotate the drum.

Order within the next 3 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

original duct was broken

  • Customer: Chad from Gilbert, SC
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 121 of 138 people found this instruction helpful
Dear PartSelect.com,

My repair went off without a hitch.

2 screws removed to remove top.
4 screws removed from inside to remove front panel w/ door.
4 screws removed from top of control panel, loosed and popped top right off.
Flathead screwdriver to pop off old plastic panel.
Removed old wire chase (plastic, approx 3... read more

Dryer would get very hot and then turn off

  • Customer: David from Auburn, MA
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 241 of 516 people found this instruction helpful
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it was a Thermo-disc p... read more

Drum belt broke

  • Customer: Adrian from Middletown, MD
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 122 of 168 people found this instruction helpful
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on.
This was a first attempt ever at fixing an appliance and it was no big deal. read more