Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the Hotpoint Dryer NJLR473ET0WB - Residential . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device,...
This part has three terminals.
This screw is sold individually.
Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.
If your dryer is making a squeaking noise this seal may need to be replaced.
They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The h...
This wheel attaches to the motor.
Screws NOT included.
This one-time use safety thermostat has a limit of 325 degrees Fahrenheit. One this thermostat trips, you will have to replace it.
This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 230 degrees Fahrenheit. The element will kick back in when the temperature drops to 200 degrees Fahrenheit - the differential of 30 degrees.
This knob will accept a D-shaped shaft.
This knob accepts a D-shaped shaft.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.