This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the ro...
$17.22
In Stock
Order within the next 1 hr and 56 mins and your part ships today!
This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heate...
$28.02
In Stock
Order within the next 1 hr and 56 mins and your part ships today!
This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM swit...
$34.76
In Stock
Order within the next 1 hr and 56 mins and your part ships today!
The thermal cut-off (Dryer Thermal Cut-Off Fuse Kit, Dryer Thermal Cut-Off Kit) prevents the dryer from overheating when the dryer high limit thermostat fails in a closed circuit condition. This part ...
$36.65
In Stock
Order within the next 1 hr and 56 mins and your part ships today!
A dryer high-limit thermostat (High Limit Thermostat, Hi-Limit Thermostat, Dryer High-Limit Thermostat) is a switch that is actuated by temperature change. This high limit thermostat acts as a safety ...
$23.56
In Stock
Order within the next 1 hr and 56 mins and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$13.45
In Stock
Order within the next 1 hr and 56 mins and your part ships today!
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$11.40
In Stock
Order within the next 1 hr and 56 mins and your part ships today!
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
$43.14
In Stock
Order within the next 1 hr and 56 mins and your part ships today!
Order within the next 1 hr and 56 mins and your part ships today!
Questions And Answers for NED4600YQ0
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Adam
December 31, 2019
Yes do you carry a Amana dryer repair kit. Belt pulley ect dont need the motor
For model number NED4600YQ0
Hello Adam,
Thank you for your question. The maintenance kit for your model is under part PS373087. We hope this helps!
The side is not working, so on manual side not drying as it should
What could be wrong.
For model number NED4600YQ0
Hi Charles, thank you for reaching out. Based on the description that you have provided, we would recommend checking the following parts: cycling thermostat, part number PS11741405, high limit thermostat, part number PS11742185, dryer blower wheel, part number PS11743785, drive belt, part number PS346995, and door gasket, part number PS11731610. We hope this sorts out your problem!
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back
... Read more off.
I ordered all the thermal sensors for the dryer. They arrived two days later and they were the correct parts. It took me about 1/2 hour to replace all three sensors and now the dryer works like new again. My wife was very pleased, so was I.