Models > NBXR453EV1WW > Parts

NBXR453EV1WW Hotpoint Dryer - Parts

All parts for the Hotpoint Dryer NBXR453EV1WW

Below is a list of all parts for the Hotpoint Dryer NBXR453EV1WW - Residential Electric. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the NBXR453EV1WW
15-28 of 90
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Lint Trap Duct Assembly

This part includes the duct felt seal (PS9861764) and gasket (PS2577674). NOTE: Per manufacturer this part no longer comes with the sensor bars.


Door Strike


Door Switch

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.


Heating Element and Housing

Note: The insulators on the housing are NOT sold separately.


Foam Seal

This is 39 inches long.


Adjustable Leveling Screw


Safety Thermostat

This is considered a thermal fuse.


Nut Cap


Terminal Block and Grounding Strap

This part is connected to the rear bulkhead of the dryer with screws. It provides a way of connecting individual electrical wires and offers protection of the device from electric...


Blower Wheel

This wheel attaches to the motor.




Drive Motor

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.


Bias Thermostat

This thermostat is located on the blower wheel.


Front Panel Assembly

All Parts for the NBXR453EV1WW
15-28 of 90