Quick Question!

Have you ever purchased from PartSelect.com before?

Models > NAV2335AWW > Parts

NAV2335AWW Amana Washer - Parts

All parts for the Amana Washer NAV2335AWW

Below is a list of all parts for the Amana Washer NAV2335AWW - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the NAV2335AWW
15-28 of 121
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.05

Screw

This screw is less than an inch long. It is a metallic screw that is used for many clothes washers.

$5.51

Hose Clamp

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

$9.14

Leveling Leg and Pad

This leveling leg, which includes a lock nut and a pad, is used to keep washing machines still and balanced. If your washer shakes and moves excessively, then this could be an easy...

$3.02

Screw

This screw is sold individually.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$23.46

Lid Switch Actuator - Black

This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.

$4.63

Suspension Spring Hook

$4.63

Screw with Washer

Sold individually.

$6.80

Pressure Switch Hose

$38.81

Lower Bearing Assembly

$8.70

Water Inlet Flume Assembly - White

$42.83

Lid Switch Kit

The lid switch kit is an assembly for replacing your washer lid switch. The function of this part is to detect if your washer lid is open or closed. If it detects that it is open it will prevent the washer from rotating and agitating until it is closed. This kit includes the bracket, actuator, switch, screws, and wire harness. To complete this installation, you will need a number two Phillips screwdriver, and a 5/16 nut driver. Before beginning this repair, make sure the power supply to your washer is disconnected. In order to install this part, you will need access to the rear of the unit.

$26.00

Drain Hose with Bend and Stay

$22.26

Brake Stator

This is the metal housing cover for the brake.

All Parts for the NAV2335AWW
15-28 of 121