Models > MWD366MN002

MWD366MN002 (MWD3660MN00) Amana Range - Overview

Get Parts and Repair Help for MWD366MN002

If you know the range repair part you need, you can browse the list of all parts on the MWD366MN002, or you can search by name or part description. You can also find your part by where it is located on the MWD366MN002 by selecting a section below. We’ve also included any installation videos we have for MWD366MN002 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the MWD366MN002 [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.86

Light Bulb - 40W

Sold Individually.

$20.38

SWITCH- PR

$24.59

BLOCK-FUSE

CLAMP- DRA

PUSH RIVET

TIMER

SWITCH

DAMPER, HOOD ASSEMBLY

DISCONTINUED

SMART BOARD & DISPLAY

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burned out light bulbs in microwave hood stove

  • Customer: Herbert from Norton MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 11 people found this instruction helpful
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold th... read more

burned out bulb

  • Customer: john from plainfield IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 9 of 12 people found this instruction helpful
removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again. read more

Microwave would not heat food. All other functionality was working as expected

  • Customer: James from Staten Island NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 8 people found this instruction helpful
I disconnected the power. Took off the front panel that was held together by two screws. Reviewed the schematic that was inside. Located the switches, saw which lead was burnt. Unscrewed the two screws that held the switch in place, cleaned the connector, and put the switch in and connectors back. Powered the device, tested for cooking/heating function... read more