Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MWD36610

MWD36610 (MN03) Amana Microwave - Overview

Get Parts and Repair Help for MWD36610

If you know the microwave repair part you need, you can browse the list of all parts on the MWD36610, or you can search by name or part description. You can also find your part by where it is located on the MWD36610 by selecting a section below. We’ve also included any installation videos we have for MWD36610 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the MWD36610

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.50

Light Bulb - 40W

The 40W lightbulb is found in the interior of your microwave, which will need to be replaced if you have noticed the light is no longer coming on after opening the door. The light ...

$21.68

Rectifier

The rectifier (also known as a diode) provides the microwave with energy to cook food. If your appliance is not producing heat or not turning on it could be due to the breakdown of the rectifier. This part works with microwaves, microwave oven combos, and wall ovens. This is one of the most common parts to fail over time in a microwave. This part is just under 3-1/2 inches in length. It is a genuine OEM part that is shipped right from the manufacturer. Make sure to use the proper precautions before attempting this repair. Ensure the appliance is unplugged.

$24.35

SWITCH- PR

$28.80

BLOCK-FUSE

PUSH RIVET

TIMER

COVER - STIRRER

FRAME, DAMPER

SWITCH

SWITCH

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burned out light bulbs in microwave hood stove

  • Customer: Herbert from Norton, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 18 of 23 people found this instruction helpful
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold th... read more

burned out bulb

  • Customer: john from plainfield, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 19 of 26 people found this instruction helpful
removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again. read more

Microwave would not heat food. All other functionality was working as expected

  • Customer: James from Staten Island, NY
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 6 of 10 people found this instruction helpful
I disconnected the power. Took off the front panel that was held together by two screws. Reviewed the schematic that was inside. Located the switches, saw which lead was burnt. Unscrewed the two screws that held the switch in place, cleaned the connector, and put the switch in and connectors back. Powered the device, tested for cooking/heating function... read more