This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
The drain hose carries used water from the washer to your house drain.
$24.94
In Stock
Questions And Answers for MVWX655DW2
Ask our experts a question about this model and we'll get back to you as soon as possible!
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
December 16, 2021
After you start washer it just quits unplug and wait a minute plug back in and it works for awhile and quits again
For model number MVWX655DW2
Hello Jim, thank you for writing. Your washing machine is a high efficiency model, it may stop automatically if it senses that there are too many suds in the washing machine tub. Please check the instructions to see if you are following the manufacturer's recommendations. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
George
March 27, 2023
Why is my washer failing shift actuators? I've installed two in the last month.
they were cheap replacements. i just ordered one from you, hope this one last. any ideas welcome.
For model number MVWX655DW2
Hi George, thank you for reaching out. The shift actuator compatible with your model is part number PS11769864. We suggest checking the wire harness connections from the main control to the motor and shifter. After replacing the actuator, we recommend inspecting the wire harnesses, part numbers PS12349299 and PS11725952, and the main control board, part number PS16875819. If any of these parts are faulty, replace them. We hope that helps!
Lately this washer is leaving black bits on the clothes. When we put in water with a flush chemical then drain it a lot of bits come out in the laundry sink. Why is this happening? Why don't particles get discharged down the drain on each wash cycle? Evidently this washer doesn't have a filter....is this correct?
Thanks.
For model number MVWX655DW2
Hi Robert, thank you for your inquiry. According to our research, your model comes with the drain pump filter, part number PS16660526. The filter may be clogged, it causes the water from the wash and rinse cycle with all the lint drains too slowly and leave deposits on your clothes. We hope that helps!
Hello, even though we use detergent and fabric softener our laundry still comes out with a smell that is hard to describe. It's not a burnt smell and we have done the washer cleaning cycle. Is there a drain plug that possibly needs to be cleaned or any other ideas? Thank You in advance.
For model number MVWX655DW2
Hello Steven, thank yo for writing. Fabric softener and detergent can build up, block filters and harbor bacteria. So, as you wash again and again, your clothes are exposed to bacteria in the water. To fix the issue, pour two cups of vinegar in your detergent drawer. Run your washer empty through the hot water cycle on the longest setting. When it’s over, use a sponge to wipe down the drum. Run the hot water cycle once more to make vinegar traces disappear. We hope this helps.
Was this helpful?
Thank you for voting!
John
November 17, 2023
Machine worked well for 3 1/2 years. Recently began to fill extremely slowly and sometimes hang up with the drain pump running. Any idea what could be causing this and which parts I may need to fix it?
For model number MVWX655DW2
Hi John,
Thank you for your question. If the washer is not working as it should, we would recommend checking the lid switch and the electronic control board. We hope this helps!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned
... Read more it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
