This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
In Stock
Order within the next 8 hrs and your part ships today!
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Order within the next 8 hrs and your part ships today!
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
$22.68
In Stock
Order within the next 8 hrs and your part ships today!
This lid hinge is a genuine OEM replacement part for your washing machine. This hinge is for the left side of your lid, although it is a good idea to replace btoh hinges at once. The hinge holds up th...
$25.32
In Stock
Order within the next 8 hrs and your part ships today!
Questions And Answers for MVWB865GW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dwight
September 1, 2022
My washer will not turn on. I checked the outlet and its works just fine. The washer is probably 6-7 years old.
For model number MVWB865GW1
Hello Dwight, thank you for asking! Most of the time such a problem is caused by a faulty lid lock assembly (part number: PS11722981). A defective lid lock sends a false signal to the circuitry that the door is not closed, preventing the washer from starting. Please feel free to contact customer service if you need further assistance. Thank you.
Hi Warren, thank you for reaching out. According to our research, an F4 error indicates an issue with the water drain. You need to power the unit down by turning off the circuit breaker or unplugging it for one minute. Power the unit up by reconnecting the power. Restart a new cycle. Monitor the washer for one minute to ensure the error code does not display again. If the error code is still displayed, you may need to check the drain hose for clogging, check the drain pump, part number PS11738156, and the electric control board, part number PS12745290. We hope this helps!
Hello Kara, thank you for getting in touch. According to our understanding, we would recommend checking the power coord and user interface first. If they are fine, then the issue is most probably with the control board, part number PS12745290. You may need to replace it to fix the issue. We hope this solves your problem!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Raised lid to remove two Torx head screws from each hinge. Lid will then lift off of hinges. Installation of new lid was the reverse of the removal procedure. It is best to install one hinge to the lid by removing that hinge from the washer. The lid can then be installed by inserting that hinge into it's spot and then over the other hinge
... Read more. Install the hinge screws into the second hinge and the job is complete. The lid now closes properly allowing the automatic lid lock to function properly.
Removed the old lid by removing the two screws on both sides of the lid holding it to the hinge. Then pull upon the lid to remove. Slide the new lid back on the hinges being careful to slide in the right slot in the lid. Replace the screws through the lid into the hinges and your done
