This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
In Stock
Order within the next 8 hrs and your part ships today!
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Order within the next 8 hrs and your part ships today!
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
$22.68
In Stock
Order within the next 8 hrs and your part ships today!
This lid hinge is a genuine OEM replacement part for your washing machine. This hinge is for the left side of your lid, although it is a good idea to replace btoh hinges at once. The hinge holds up th...
$25.32
In Stock
Order within the next 8 hrs and your part ships today!
Questions And Answers for MVWB835DW5
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
WILLIAM
September 8, 2023
washer making constant loud noise while spinning
For model number MVWB835DW5
Hello William, thank you for getting in touch. The most likely reason for a washer making noise during the spin cycle is an unbalanced load, or the machine is not level. If this is not the issue, then the most probable issue is with the washer clutch kit, part number PS10060062. We hope this information helps!
My Maytag bravo topload washing machine will not power up and when i unplugged and plugged back into the outlet i get an shorting sound. Help please.
For model number MVWB835DW5
Hi Daniel,
Thank you for your question. If you hear a shorting sound coming from the washer when you plug it in, you should check the lid lock assembly, the electronic control board, the water inlet valve, the rotor, the stator and the pump. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Washer started a grinding (bad bearing) sound when in the spin mode. Had Sears home repair service come and they said repair of transmission/bearing issue would be almost $650. I decided I could buy a new one for around that number and sent him on his way after paying $139 for service call.. washer is about 3-4 years old. Any ideas??
For model number MVWB835DW5
Hi Patrick, thank you for the question. Based on our understanding, the issue is most probably with the gear case, part number PS12741641. You may need to replace it to fix the issue. We hope this sorts out your problem!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Raised lid to remove two Torx head screws from each hinge. Lid will then lift off of hinges. Installation of new lid was the reverse of the removal procedure. It is best to install one hinge to the lid by removing that hinge from the washer. The lid can then be installed by inserting that hinge into it's spot and then over the other hinge
... Read more. Install the hinge screws into the second hinge and the job is complete. The lid now closes properly allowing the automatic lid lock to function properly.
Removed the old lid by removing the two screws on both sides of the lid holding it to the hinge. Then pull upon the lid to remove. Slide the new lid back on the hinges being careful to slide in the right slot in the lid. Replace the screws through the lid into the hinges and your done