Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MV-1310B

MV-1310B LG Microwave - Overview

Get Parts and Repair Help for MV-1310B

If you know the microwave repair part you need, you can browse the list of all parts on the MV-1310B, or you can search by name or part description. You can also find your part by where it is located on the MV-1310B by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$16.00

Filter,Grease

This is a grease filter manufactured for a microwave. The microwave grease filter filters the exhaust air and traps any grease flowing out of the appliance. It is important to keep...

Order within the next 14 mins and your part ships today!
$26.11

Tray,Glass

This glass tray sits in the bottom of your microwave. The glass tray, also known as a turntable, rotates when the microwave is heating up food to ensure the food is evenly heated.If your glass tray is broken, shattered, or is not rotating when heating, it is best to replace it for better heating results. The tray has dimensions of 33 x 35.6 x 2.5 cm and weighs 455 grams. Refer to the manual provided by the manufacturer for installation instructions and guidance.

Order within the next 14 mins and your part ships today!
$6.92

Switch,Micro

This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door sw...

Order within the next 14 mins and your part ships today!
$6.92

Bracket,Idle

Order within the next 14 mins and your part ships today!
$4.40

Fuse,Time Delay

The fuse-time delay may also be known as a line fuse or a microwave fuse, and it is a piece for your microwave. The function of this part is to shut off the microwave if there is a...

Order within the next 14 mins and your part ships today!
$4.40

Screw,Tapping

Order within the next 14 mins and your part ships today!
$4.40

Cover,Lamp

Order within the next 14 mins and your part ships today!
$4.40

Screw,Taptite

Order within the next 14 mins and your part ships today!
$6.92

Socket,Lamp

Order within the next 14 mins and your part ships today!
$14.24

Cable,Assembly

Order within the next 14 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

suddenly stopped working while in use

  • Customer: Kevin from Colonia, NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
i unplugged the unit,unscrewed the outer shell so that all the wiring and internal components were visible.starting at the first of three micro switches i removed the slip on terminals installed the alligator clips too the wires so the switch would now be bypassed.i made sure the wires and clips were not touching anything plugged unit in and it worked.i then... read more

sparking thru a whole in cover

  • Customer: Dolores from Lancaster, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Pull 2 retaining pins out by hand. Slip cover out toward front and discard. Slip new cover into 2 tabs toward rear and press retaining pins back in place. Repair complete. Works great all for about $20 including shp & tax. read more